Pressure Gauge - Department of Atomic Energy

1. PRESSURE GAUGE, RANGE 0-250 KG per Sq. Cm,2. PRESSURE GAUGE, RANGE 0-160 KG per Sq. Cm,3. PRESSU

Goods
Qty:105

Tender Timeline

Tender Issue
June 21, 2025 at 3:42 PM

Tender Description

Tender Title: Pressure Gauge

Tender Reference Number: 415b1b71c
Issuing Authority/Department: Department of Atomic Energy

The Department of Atomic Energy is inviting bids for the procurement of Pressure Gauges under the tender reference number 415b1b71c. This tender encompasses a variety of pressure gauges with different ranges suitable for various applications in industrial and research environments. The primary objective of this tender is to secure reliable measurement tools that meet specific technical parameters while ensuring safety and quality.

Scope of Work and Objectives

Tender BOQ Items

9 Items
1.

1. PRESSURE GAUGE, RANGE 0-250 KG per Sq. Cm

PRESSURE GAUGE, RANGE 0-250 KG./Sq. Cm as per the specifications category-1 attached.

Qty:10
Unit:nos
60
2.

2. PRESSURE GAUGE, RANGE 0-160 KG per Sq. Cm

PRESSURE GAUGE, RANGE 0-160 KG./Sq. Cm as per the specifications category-3 attached.

Qty:10
Unit:nos
60
3.

3. PRESSURE GAUGE, RANGE 0-160 KG per Sq. Cm

PRESSURE GAUGE, RANGE 0-160 KG./Sq. Cm as per the specifications category-2 attached.

Qty:5
Unit:nos
60
4.

4. PRESSURE GAUGE, RANGE 0-40 KG per Sq. Cm

PRESSURE GAUGE, RANGE 0-40 KG./Sq. Cm as per the specifications category-2 attached.

Qty:5
Unit:nos
60
5.

5. PRESSURE GAUGE, RANGE 0-160 KG per Sq. Cm

PRESSURE GAUGE, RANGE 0-160 KG./Sq. Cm as per the specifications category-2 attached.

Qty:25
Unit:nos
60
6.

6. PRESSURE GAUGE, RANGE 0-100 KG per Sq. Cm

PRESSURE GAUGE, RANGE 0-100 KG./Sq. Cm as per the specifications category-2 attached.

Qty:25
Unit:nos
60
7.

7. PRESSURE GAUGE, RANGE 0-40 KG per Sq. Cm

PRESSURE GAUGE, RANGE 0-40 KG./Sq. Cm as per the specifications category-3 attached.

Qty:5
Unit:nos
60
8.

8. PRESSURE GAUGE, RANGE 0-25 KG per Sq. Cm

PRESSURE GAUGE, RANGE 0-25 KG./Sq. Cm as per the specifications category-3 attached.

Qty:10
Unit:nos
60
9.

9. PRESSURE GAUGE, RANGE 0-16 KG per Sq. Cm

PRESSURE GAUGE, RANGE 0-16 KG./Sq. Cm as per the specifications category-3 attached.

Qty:10
Unit:nos
60

General Information

Item Category
1. PRESSURE GAUGE, RANGE 0-250 KG per Sq. Cm , 2. PRESSURE GAUGE, RANGE 0-160 KG per Sq. Cm , 3. PRESSURE GAUGE, RANGE 0-160 KG per Sq. Cm , 4. PRESSURE GAUGE, RANGE 0-40 KG per Sq. Cm , 5. PRESSURE GAUGE, RANGE 0-160 KG per Sq. Cm , 6. PRESSURE GAUGE, RANGE 0-100 KG per Sq. Cm , 7. PRESSURE GAUGE, RANGE 0-40 KG per Sq. Cm , 8. PRESSURE GAUGE, RANGE 0-25 KG per Sq. Cm , 9. PRESSURE GAUGE, RANGE 0-16 KG per Sq. Cm
Ministry Name
PMO
Department Name
Department of Atomic Energy
Organisation Name
Nuclear Power Corporation Of India Limited

Financial Information

Bid Offer Validity
90 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
7 Days

Tender Documents

5 Documents
GeM-Bidding-7797940.pdfMain Document
BOQ DocumentBOQ BOQ
BOQ DocumentBOQ BOQ
Buyer uploaded ATC documentATC APPENDIX
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Certificate (Requested in ATC)
  • OEM Authorization Certificate *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

Vernier calliper- .1mm 10 division , Range 0-150mm,VERNIER CALLIPER - .02mm 50 division , Range 0-1

GEM
Goods
Qty:755
5 Files
Development Commissioner (micro Small & Medium Enterprises)
Boq › Boql
Vernier calliper- .1mm 10 division , Range 0-150mm , VERNIER CALLIPER - .02mm 50 division , Range 0-150mm , SCREW GAUGE , Range 0-25mm , SPHEROMETERE , MIRROR PIECE - 4 X 9 cm , MIRROR STAND , NEEDLE PIN or EXPERIMENT PIN , GLASS SLAB - 10 X10X 1 cm , GLASS PRISM , BAR MAGNET , NEEDLE COMPASS , SIMPLE PENDULUM BOB , PENDULUM STAND , DIGITAL STOPWATCH , DIGITAL WEIGHT MACHINE 0.1 gm - 500gm , HOLLOW CYLINDER , SOLID CYLINDER , RUBBER CORK , SPRING POWERED PROCTILE LAUNCHER , THREAD , Convex lens , f - 10 cm , Optical bench vertical stand
June 20, 2025
July 11, 2025 at 11:00 AM
View Details

Testosterone propionate 250 mg Inj,Bandage Elastic Adhesive 6 cm X 3 Mtrs and 5 6 mtr stretched poi

₹2,674.00
GEM
Goods
Qty:56.5K
4 Files
Indian Army
Boq › Boql
Testosterone propionate 250 mg Inj , Bandage Elastic Adhesive 6 cm X 3 Mtrs and 5 6 mtr stretched point , Gel Heel Cup L , Gel Heel Cup M , Injection Iron Sucrose Usp 20 Mg 5 Ml , Adult diapers with a optimum elastic fit capacity small size Pack of 10 , Adult diapers with a optimum elastic fit capacity medium size Pack of 10 , Adult diapers with a optimum elastic fit capacity Large size Pack of 10 , Lotepredenol Etabonate 0 point 5 pct Bott Of 5 Ml , Dorzolamide 2 pct Timolol 0 point 5 pct bott of 5 ml , Fluticasone0 point 05 per w w cream tube of 10 gm , Bandage Open Woven compressed 2 point 5 cm x 4 metres , Bimatoprost 0 point 03 pct bott of 3ml , 0 05 per Halobetasol Propionate 3 per Salicylic Ointment , Adapalene 0 point 1per Tube of 15gm , Lotion Ketoconazole 5 pct , Tab Accamprostate 333 Mg , Antihistamine each 5ml containing Benadryl 12 point 5 mg 500 ml bott Syp , Fluvoxamine 50 mg Cap , Syp cough of 60 mlPhenergan1 5mg 5ml pholcodeine 1 5mg , Powder Lactobacillus 1 gm sachet , Bethanechol 25 Mg Tab , Eplerenone 50Mg Tab , 0 point 05 per Halobetasol Propionate Ointment , Imipramine 25 mg Tab , Syp Disodium hydrogen phosphate bott of 100 ml point , Amisulapride 200Mg Tab , Doxepin 25 mg Cap , Venlafaxine 37 point 5mg Tab , Tab Bilastine 20 mg , Cyproheptadine HCl 2 mg 5ml bott of 100 ml , Tab Ethamsylate 500 mg , Syringe dosposable plastic sterile 10 ml with needle
June 19, 2025
July 10, 2025 at 1:00 PM
View Details

Oil Level Sensor,Temperature Sensor,Solenoid,Directional Control Valve,Oil Pressure Gauge 0 to 10 k

GEM
Goods
Qty:162
4 Files
Indian Navy
Boq › Boql
Oil Level Sensor , Temperature Sensor , Solenoid , Directional Control Valve , Oil Pressure Gauge 0 to 10 kg per cm2 100mm dial , Limit Switch Push Pull Type , Temperature Gauge , Differential Oil Pressure Gauge , Auto Drain Valve , Pressure Regulator , Compound Pressure Gauge 1 to 1 bar , Cooper Bearing Sensor 01 BCP 130MM , Front drive handle , 3 pole Circuit breaker 415V , 2 pole Circuit breaker 415V , Fuse Element 32Amps , Monitoring relay , Phase failure relay , Temperature protection relay , Contactor relay 48V AC Coil , Contactor 18A 110 V AC , 3 Pole Circuit breaker 10A 230V , Bimetal overload relay , Level Sensor , Transformer 200VA , Circuit Breaker 2 Pole 6A , Voltage Monitoring Relay , Relay VMR1 , Pump protection unit , Plug in relay 12amps , Latch Contact Block , 3Pole Power Contactor 230V AC , Auxilary Contact Blocks , 3 Pole Power contactor 80A , Soft Starter Altistart 480 , Fuse 125amps Protistor , Compact Circuit Breaker 1000A , Miniature Power Relay , 4 Pole Contactor 40A 2NO 2NC , 3 Pole Contactor 40A 2NO 2NC , Relay Timer 240V AC , Cut Out Relay 230VAC 50 Hz , Expansion Module DM8 , 3 Pole Motor circuit breaker 4 to6A , 3 Pole Motor circuit breaker 1 to1.6A , Power Contactor 110V , 4 pole Single Contact plug in terminals , GV Motor circuit breaker , Motor safety breaker , Low voltage MCB Single pole , Plug in relay 6 amps , D Aux Contactor 3 pole 3 NO , D Aux Contactor 3 pole 4 NO , D Aux Contactor 2 pole 2 NO , Relay 3PDT , Voltage Transformer 230V 160VA , Pilot Solenoid Valve coil 24VDC , Level Transmitter , Solenoid Valve , Valve B3 1 inch DSP , Level switch , RTD Temperature Sensor
June 18, 2025
July 9, 2025 at 12:00 PM
View Details

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Bathroom Water Shower (V2),Bathroom Water

₹39,500.00
GEM
Goods
Qty:1,991
5 Files
Indian Army
Stru › Plum › Fauc
Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Bathroom Water Shower (V2) (Q3) , Bathroom or Toilet Mirror (V2) (Q4) , Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) as per IS: 1703 (Q4) , Stainless Steel Shelf Rack (Q3) , GI pipe med grade 20mm ISI Marked , SS wire cloth 0 point 56mm dia 1 point 18 mm aperture of 0 point 9 mtr wide and 15 mtr long Roll , SS wire cloth 0 point 56 mm dia 1 point 18 mm aperture of 1 point 20 mtr wide and 15 mtr long Roll , SS wire cloth 0 point 36mm dia 1 point 18 mm aperture of 1 point 20 mtr wide and 15 mtr long Roll , Wire mesh 0 point 41mm steel , Wire mesh 0 point 9 mm steel aperture of 1 point 20 mtr wide and 15 mtr long Roll , PVC SWR Pipe 75mm ISI Marked , Tower bolt almn 200 mm ISI Marked , Vitreous china urinal White flat back of size 465x355x265mm , Alm Butt hinge 100mm , Alm Hasp and staple 100mm , Hasp and Staple 75 mm dia , MS Hasp and Staple wire type stove enamelled 100 mm size , MS Hasp and Staple wire type stove enamelled 75 mm size , Door magnetic Catcher Size 6 x 2 point 5 x 1 point 5 cm , Door Handle almn 200 mm , Piano Type butt Hinges flap 3 by 4 inch , MS blue tag nails , MS screw wood 25 mm in 100 Nos Pkt , MS screw wood 35 mm in 100 Nos Pkt , MS screw wood 40mm in 100 Nos Pkt , MS Screws 3 by 4 inch , MS Screws 1 and 1 by 2 inch , MS Screws 1 inch , MS Screws 2 inch , Steel Screws 8 by 19 100 Gram pkt , MS Sliding door Bolt 250 mm complete with nut bolt , Plain wooden beading of size 15 mm x 15 mm , Rubber beading for AI Door , PVC Handle suitable for LL flushing cistern 10 ltrs capacity , PVC SWR Bend 100 mm with access door , PVC SWR Bend 75 mm with access door , Sliding door bolt almn 250mm , Sliding door bolt MS 300mm , Tower bolt almn 100mm , Tower bolt almn 150mm , White cement , L Bend pipe 32 mm dia for WC Indian type , Tank cover for 500 oblique 1000 ltr tank , Fevicol 1 kg pack , Yellow Color Road Stud of ABS Material , Solar light Road Stud of Aluminium Material , Convex Mirror of size 40 inch for Road , Factory made flush shutter of size 900 x 2100 x 35mm , 30mm thick wire gauzed skelton shutter of size 900 x 2100 mm factory made solid core stainless steel 36 gauge fly mesh of 304 grades , Mortise lock 100 oblique 65 ISI Marked , Stainless steell knob for door lock , Door seal strip , Plywood 12mm 8 feet x 4 feet BWR grade , Plywood 4 mm 8 feet x 4 feet BWR Grade , Plywood 6 mm 8 feet x 4 feet BWR Grade , Plywood 8 mm 8 feet x 4 feet BWR Grade , Plywood 19 mm 8 feet x 4 feet BWR Grade , Plywood 12 mm 7 feet x 3 feet BWR Type , Plywood one side teakface 8 feet x 4 feet x 4 mm , Double spring floor machine ISI Marked , Plywood commercial 8 feet x 4 feet x 12 mmBWR Grade , Door handle alm 100 mm , Door handle almn 150 mm , MS Nails wire 100 mm , MS Nails wire 25 mm , MS Nails wire 50 mm , MS Nails wire 75 mm , MS Nails wire one and half inch , Nails 3 by 4 inch long , MS Tower Bolt 100mm , MS Tower Bolt 150mm , MS Tower Bolt 200mm , SS brackets for 20 mm curtain rods , SS brackets for 25 mm curtain rods , SS Wall to wall brackets for 20 mm curtain rods , SS finials for 20 mm curtain rods , Corner Glass shelves 8 mm thick with ABS oblique CP brackets and railings with 300 mm radius , WHB Glass shelves 8 mm thick in rectangular shape of 45x12 cmwith ABS oblique CP brackets and railings
June 16, 2025
July 7, 2025 at 2:00 PM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity capable of supplying pressure gauges, demonstrating prior experience in similar contracts, and possessing relevant certifications. It’s crucial that bidders meet these criteria to qualify for the evaluation.

The pressure gauges must meet or exceed industry standards for accuracy, reliability, and safety. Specifications include calibration standards, material durability for high-pressure applications, and compliance with all applicable quality standards.

All participants are required to submit a financial proposal that clearly outlines the costs associated with the supply of the pressure gauges. This should encompass total pricing, including any taxes and delivery charges, ensuring pricing transparency and competitiveness.

Bidders must submit all necessary documents electronically via the designated tender submission portal. Compliance with the required document formats is essential to avoid any disqualification during the evaluation process.

Micro, Small, and Medium Enterprises (MSEs) may have access to several benefits, including financial concessions and preferences during the evaluation process. These provisions aim to encourage greater participation from smaller entities in government contracts.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders