Design, Fabrication & Supply of an Electrostatic Deflector System

Design, Fabrication & Supply of an electrostatic deflector system as per the specification enclosed

Goods
Qty:1
EMD: ₹88,507

Tender Timeline

Tender Issue
June 16, 2025 at 4:58 PM

Tender Description

Tender Title: Design, Fabrication & Supply of an Electrostatic Deflector System

Tender Reference Number: d6834aaa
Issuing Authority: Department of Atomic Energy

Scope of Work and Objectives

The Department of Atomic Energy seeks to engage a qualified contractor for the design, fabrication, and supply of an electrostatic deflector system. The objective of this tender is to procure a reliable system that meets specified technical requirements to enhance performance and efficiency in atomic energy applications. The successful bidder will be tasked to deliver a solution that adheres to high industry standards while ensuring optimal functionality.

General Information

Item Category
Design, Fabrication & Supply of an electrostatic deflector system as per the specification enclosed
Ministry Name

Financial Information

EMD Amount
₹88,507.00
Bid Offer Validity
120 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
RA Qualification Rule
H1-Highest Priced Bid Elimination
Inspection Required
Yes
Technical Clarifications Time
3 Days

Tender Documents

4 Documents
GeM-Bidding-7902640.pdfMain Document
Other DocumentsOTHER
Buyer uploaded ATC documentATC ATC
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Certificate (Requested in ATC)
  • Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

Supply installation testing and commisissioning of 40 kva CPCB IV Plus compliant genset Efficent CR

₹24,000.00
GEM
Goods
Qty:479
5 Files
Indian Army
Boq › Boql
Supply installation testing and commisissioning of 40 kva CPCB IV Plus compliant genset Efficent CRDI system 02E series at low emission comma high efficiency engine tech specification , Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conforming to lS 8112 to 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JK or Dalmia , Coarse Sand free from vegitation , Coarse aggregate 2Omm graded , Coarse aggregate 40mm graded , Hard Core 40 to 63 mm graded , Stone for RR Masonary less than 6 Inch , Pre painted galvatume aluminium zinc coating Gl based corrugated steel sheet point 50 mm thick an colour having a tensile strength 550 Mpa of size 08 Feet by 3 Feet , MS Pipe med grade 50mm dia confirming to lS 1611 to 1998 JINDAL or TATA or SAIL , Painting Brush 4 Inch lSl Marked , Anti corrosive red oxide zinc chromate primer confirming to lS 5 to 2004 Make Berger or Asian or Nerolac , Synthetic paint enamelled OG confirming to lS 5 to 2004 Make Berger or Asian , Thinner , Self driving screw for PPGI sheet 100 Nos or Pkt , lron welding rod confirming to lS 814 2002 lSl Marked 3 Point 15mm thick 100 Nos or Pkt , MCB SPN 240 Volts 32 Amps Make Havells L and T or Standard , MCB SP 6 to 32 Amps Make Havells or L and T Standard , PVC tape 19mm wide 5m long Make Steel grip or Anchor or Kilinjal , On load Change over switch within sheet steel enclosure 100 Amps Comma 4 pole TPN confirming to lS 13947 Parl 3 2607 Make Havells or Standard or L and T , Cable PVC insulated electric cables heavy duty1100 volts grade multi stranded copper conductor of size 1 point 5 Sqmm single core FRLS , Cable PVC insulated electric cables heavy duty1100 volts grade multi stranded copper conductor of size 2 point 5 Sqmm single core FRLS , wire armored electric power cable heavy duty 1100 volts grade with multi stranded aluminum conductorofsize50 Sqm 3 point 5 core comma FRLS , Switch Piano 5 Amp 230 Volts Flush type one way snow white Make Anchor or SSK or CONA , Switch socket combination Snow white multipurpose 2 in 1 comma 15A comma 230V Make Anchor or SSK or CONA , LED Tuble light fittings 15W 230V box type 4 feets with CRCA body Pre coated white and Prewired for LED tuble complete Make Havells or Bajaj or Philips or Crompton , Screw full thread 6x19 mm lSl Marked 200 screw per pkt , PVC switch board Snow white of size 7 inch x 4 inch for socket and switches Make Supreme or Polycab or Finolex , Ceiling rose three terminal Snow white Make Anchor or SSK or CONA , PVC Round or Squire Block Make Polycab or Supreme or Finolex , Distribution box 4 Way double door SPN 240 volts copper bus bar and neutral link earthing stud conforming to lS 13032 and lS 8623 double doortype Make Havells or Legrand or L and T , Service cable PVC insulated aluminium conductor 1100 volt grade Heavy duty served with inner sheathing of PVC tap and overall PVC sheathed in service connection 6 Sqmm 2 core , Earthing Plate 600 by 600 by 6mm galvanised sleel suitable for Gl strip fitings coma drilled with two nos holes for 6 mm dia near one side , Cl earthing pit cover of size 300 by 300 by 6mm with angle iron ISA 20 by 20 by 3mm thick MS frame , Funnel fitted with 20mm dia Gl Pipe 1 point 5m long Make Jindal or Tata or Kalinga , Galvanized lron strip 32 by 6 mm , Charcoal , Salt Normal , Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to lS 8112 to 1989 Make Birla Gold or Ambuja or Ultratech , Coarse Sand free from vegetation , Coarse aggregate 20mm graded
June 21, 2025
July 14, 2025 at 9:00 PM
View Details

Frequently Asked Questions

The eligibility requirements for participating in the tender include being a registered entity that specializes in the design and fabrication of equipment. Bidders must possess relevant experience, evidenced by previous projects or contracts that meet the tender specifications. Adequate documentation must be provided to support claims of experience, and bidders should ensure compliance with industry regulations to qualify effectively.

The technical specifications for the electrostatic deflector system include adherence to predefined operational parameters, safety regulations, and standards specific to the atomic energy sector. Bidders are required to present detailed technical proposals that outline how their solutions will meet or exceed these specifications in order to demonstrate capability and compliance.

Payment terms for this tender will typically outline the milestones at which payments may be made, contingent on the delivery and acceptance of the electrostatic deflector system. Bidders will need to include comprehensive financial details in their proposal, addressing payment schedules and methods, to ensure alignment with the tender’s expectations and requirements regarding monetary transactions.

Submissions for the tender must include detailed project descriptions and financial proposals, adhering to the formats specified in the tender documents. All documents should be submitted electronically and formatted as requested, ensuring clarity and comprehensiveness to facilitate proper review and evaluation. Incomplete submissions or those not following stipulated formats may be disqualified.

Yes, this tender provides specific benefits for Micro, Small, and Medium Enterprises (MSEs), allowing them to participate with reduced financial thresholds. To encourage competition and inclusivity, MSEs may also receive additional evaluation points. Startups are similarly extended provisions to facilitate their participation, promoting adherence to Make in India policies while fostering local content and procurement rules.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders