Supply of F/M Vault Access Door Seals

1. Supply of“ F/M Vault Access Door seals” as per following: a) FLAPPER-I DOOR SEALS as per Dra

Goods
Qty:4

Tender Timeline

Tender Issue
June 23, 2025 at 12:06 PM

Tender Description

Tender Title: Supply of F/M Vault Access Door Seals
Tender Reference Number: c6fe4376
Issuing Authority/Department: Department of Atomic Energy

Overview of the Tender

The purpose of this tender is to solicit proposals for the supply of F/M Vault Access Door seals. The Department of Atomic Energy is seeking qualified vendors to provide high-quality vault seals, which are crucial to maintaining security and environmental standards in sensitive areas.

Scope of Work and Objectives

The scope of work encompasses the following key areas:

  1. Supply of F/M Vault Access Door seals as per specified drawings.
  2. Supply of F/M Service Area Door seals, also in accordance with detailed project drawings.
  3. Delivery and installation of these door seals are integral to ensuring the operational integrity and safety of vault access points.

General Information

Item Category
1. Supply of“ F/M Vault Access Door seals” as per following: a) FLAPPER-I DOOR SEALS as per Drawing , 2. Supply of“ F/M Service Area Door seals” as per following: a) FLAPPER-I DOOR SEALS as per Drawing
Ministry Name
PMO
Department Name
Department of Atomic Energy
Organisation Name
Nuclear Power Corporation Of India Limited

Financial Information

Bid Offer Validity
90 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
7 Days

Tender Documents

9 Documents
GeM-Bidding-7937317.pdfMain Document
Other DocumentsOTHER
Other DocumentsOTHER
Other DocumentsOTHER
Buyer uploaded ATC documentATC ATC
Other DocumentsOTHER
Other DocumentsOTHER FORM
Buyer uploaded ATC documentATC ATC
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

Fabrication and Supply of Emergency door to IAF Naliya as per Drawing No. 61-06-602 & as per EDT 28

₹75,000.00
GEM
Goods
Qty:12
32 Files
Hindustan Aeronautics Limited (hal)
Univ
Fabrication and Supply of Emergency door to IAF Naliya as per Drawing No. 61-06-602 & as per EDT 284 , Installation of Emergency door at IAF Naliya as per EDT 2849 , Fabrication and Supply of Double Leaf door to IAF Naliya as per Drawing No. 61-06-615 & as per EDT 2 , Installation of Double Leaf door at IAF Naliya as per EDT 2849 , Fabrication and Supply of Sliding door to IAF Naliya as per Drawing No. 61-06-625 & as per EDT 2849 , Installation of Sliding door at IAF Naliya as per EDT 2849 , Fabrication and Supply of Emergency door to IAF Kanpur as per Drawing No. 61-06- 602 & as per EDT 284 , Installation of Emergency door at IAF Kanpur as per EDT 2849 , Fabrication and Supply of Double Leaf door to IAF Kanpur as per Drawing No. 61-06- 615 & as per EDT 2 , Installation of Double Leaf door at IAF Kanpur as per EDT 2849 , Fabrication and Supply of Sliding door to IAF Kanpur as per Drawing No. 61-06-625 & as per EDT 2849 , Installation of Sliding door at IAF Kanpur as per EDT 2849
June 21, 2025
July 12, 2025 at 12:00 PM
View Details

Fabrication and supply of Security Post of size of 2 point 44 m x 1 point 86 m and 2 point 8 m clea

GEM
Goods
Qty:2,868
5 Files
Indian Army
AMRITSAR, PUNJAB
Boq › Boql
Fabrication and supply of Security Post of size of 2 point 44 m x 1 point 86 m and 2 point 8 m clear height from FFL to False Ceiling as per drawing attached , Distribution box 4 way double door SPN comma 240 volts copper bus bar and neutral link earthing stud conforming to IS 13032 and IS 8623 double door type Make Havells oblique Legrand oblique L and T , MCB 16 Amp SP with cover Make Havells oblique Standard oblique Indonesian , MCB 32 Amp DP with cover Make Havells oblique Standard oblique Indonesian , Insulation Tape 2 cm width 10 mtr long ISI marked Make Steelgrip oblique Anchor oblique Cona , PVC Insulated Cable 1 point 5 sqmm copper conductor unsheathed conforming to IS 694 1990 Make Havells oblique Plaza oblique Anchor , PVC Insulated Cable 2 point 5sqmm copper conductor unsheathed conforming single core , PVC insulated unarmoured cable 10 sqmm 2 core Aluminium Conductor with 3 mm dia GI wire and round type insulated Make Havells oblique Plaza oblique Anchor , PVC capping casing 25mm x 16mm Make Plaza oblique Sahil oblique Cona , Switch Socket combination 5 oblique 15 Amps 3 Pin box type Make Anchor oblique Cona oblique Plaza , 18 oblique 20 watt LED tube light with complete fitting Make Havells oblique Anchor oblique Plaza oblique Crompton oblique Bajaj , Screw full threaded 1 oblique 2 inch per pkt 100 Nos , Switch Piano type 5 oblique 6 Amps one way switch ISI marked Make Anchor oblique Cona oblique Plaza , PVC T for Casing capping , PVC L bend for casing capping , Ceiling Fan 1200mm Sweep with regulator comma Hooks comma Clamps and complete fittings Make USHA oblique Bajaj oblique Khaitan , PVC ceiling rose Make Anchor oblique Cona oblique Plaza , PVC Gang box 3 switches 5 amp Make Anchor oblique Cona oblique Plaza , PVC Gang box 1 switches 5 amp Make Anchor oblique Cona oblique Plaza , PVC Square block 4 inch x 4 feet , Lightning conductor shall be provided with aluminium rod of 12mm dia 300mm long Aluminium down conductor 25mmx3mmx6m GI earth plate of size 600x600x6mm , Ordinary Portland Cement 43 Gradeconfirming to IS 8112 in 50 kgs HDPE bags Make Ambuja oblique ACC comma UltraTech , Fine Aggregate sand of best quality confirming to IS 383 1970 , Crushed stone Aggregate 20mm grade confirming to IS 383 1970 , Crushed stone Aggregate 40mm grade confirming to IS 383 1970 , Hard core stone Aggregate not exceeding 63 mm , Well Burnt common building bricks of Sub Class B of size 23 x 11 point 5 x 7 point 5 cm conforning to IS 2212 1991 , Non skid ceramic tiles 400 x 400 x 7 to 8 mm thick qty 36 Nos Make Somany oblique Kajaria oblique Orient Bell , Bitumen for expansion joint of plinth protection , Cement based Paint Make Indigo oblique Berger oblique Nerolac , Primer for cement plaster surfaces Make Dulux oblique Berger oblique Nerolac , M S flat 35 x 3 mm wind tie TATA oblique SAIL oblique ACCIL oblique JINDAL oblique APL Apollo oblique Authorised manufacture oblique dealer
June 4, 2025
June 25, 2025 at 10:00 AM
View Details

M - Seal as per IS 9197,HYDRAULICALLY REGULATED DOOR CLOSERS,Sinks / Wash Basins - Vitreous China

₹26,300.00
GEM
Goods
Qty:1,588
43 Files
Indian Army
HYDERABAD, TELANGANA
Manu › Adhe
M - Seal as per IS 9197 (Q3) , HYDRAULICALLY REGULATED DOOR CLOSERS (Q3) , Sinks / Wash Basins - Vitreous China as per IS 2556 (Part 4) (Q3) , European Pattern Toilet Seat Vitreous China (Q3) , Urinal Bowls as per IS 2556 (Part 6) (Q3) , wire nails (Q4) , Wood screws (Q3) , Door Handles as per IS 208 (Q4) , taps or valves of nonferrous metals (Q3) , Connection Pipe with Nuts (V2) (Q3) , Plastics Bib Taps Pillar Taps Angle Valves and Stop Valves as per IS 9763:2000 (Latest) (Q3) , Stainless Steel Butt Hinges as per IS 12817 (Q3) , Taflon Tape as per IS 14635 (Q3) , Chlorinated Polyvinyl Chloride (CPVC) Pipes for Potable Hot and Cold Water Distribution Supplies (V2) as per IS 15778 (Q3) , Commercial CPVC Pipe Fittings (Q3) , Towel Rail / Ring / Rack / Hooks for Bathroom (Q3) , Floor Drain Traps (Q3) , PVC Waste pipe 32 X 800 mm , Urinal Waste Pipe 32mmX750mm , GI Reducing Tee 80mmX50mm , MS helical spring door closer , Waste Coupling 40 mm , Sink Waste Coupling 100mm , PTMT Float valve size 20 mm , PTMT Alloy Cabinet mirror , Wire mesh stainless steel Grade 304 , Looking Marrior for MES Drawing , Aluminium Plain Sheets for specified size , Plastic seat cover for Anglo-Indian Type
June 3, 2025
June 25, 2025 at 9:00 AM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity with demonstrated experience in safety supply procurement. Bidders must also provide evidence of financial stability through relevant financial documents, alongside all necessary compliance certificates to satisfy local regulations.

The technical specifications require adherence to the approved drawings provided in the tender documentation. Vendors must ensure that the seals demonstrate exceptional durability and safety standards suitable for high-security areas, as specified by the Department of Atomic Energy.

The submission method entails uploading all required documents through the official electronic platform provided for this tender. Bidders must ensure that submissions are complete and meet specified documentation standards prior to the deadline.

Yes, there are specific provisions for Micro, Small, and Medium Enterprises (MSEs) and startups. These provisions are designed to enhance accessibility and competitiveness among fledgling businesses within the tender process, promoting indirect benefits and opportunities.

Upon awarding the contract, the selected vendor must submit a performance security that guarantees the fulfillment of all contract obligations. Detailed information regarding the performance bond will be provided in the contract documentation to ensure compliance with project demands.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders