Re heater drain pump spares - Department of Atomic Energy

1. Supply of IMPELLER for pump model No.80X50 UCW M-25, Part No 21.,2. Supply of IMPELLER WEAR RING

Goods
Qty:36
EMD: ₹55,253

Tender Timeline

Tender Issue
June 13, 2025 at 2:33 PM

Tender Description for 1582b9e84

Tender Title: Re heater drain pump spares
Tender Reference Number: 1582b9e84
Issuing Authority: Department of Atomic Energy

The Department of Atomic Energy invites bids for the supply of specific components related to the 80X50 UCW M-25 pump model. This tender encompasses the procurement of various spare parts critical for the maintenance and operation of these pumps. The scope emphasizes quality, compatibility, and timely delivery, ensuring that the operational efficiency of the cooling water system is uncompromised.

Scope of Work and Objectives

Tender BOQ Items

13 Items
1.

1. Supply of IMPELLER for pump model No.80X50 UCW M-25, Part No 21.

Supply of IMPELLER for pump model No.80X50 UCW M-25, Part No 21.

Qty:1
Unit:nos
180
2.

2. Supply of IMPELLER WEAR RING for pump model No.80X50 UCW M-25, Part No 025.1.

Supply of IMPELLER WEAR RING for pump model No.80X50 UCW M-25, Part No 025.1.

Qty:1
Unit:nos
180
3.

3. Supply of SHAFT WITH KEYS, Impeller and coupling, for pump model No.80X50 UCW M-25, Part Nos. 31,039-1 and 039.2 respectively.

Supply of SHAFT WITH KEYS (Impeller and coupling) for pump model No.80X50 UCW M-25, Part Nos. 31,039-1 and 039.2 respectively.

Qty:1
Unit:set
180
4.

4. Supply of IMPELLER NUT for pump model No.80X50 UCW M-25, Part No 048

Supply of IMPELLER NUT for pump model No.80X50 UCW M-25, Part No 048

Qty:1
Unit:nos
180
5.

5. Supply of GASKET SLEEVE for pump model No.80X50 UCW M-25, Part No.117.2.

Supply of GASKET SLEEVE for pump model No.80X50 UCW M-25, Part No.117.2.

Qty:10
Unit:nos
180
6.

6. Supply of BEARING NUT for pump model No.80X50 UCW M-25 part no - 129.

Supply of BEARING NUT for pump model No.80X50 UCW M-25 part no - 129.

Qty:1
Unit:nos
180
7.

7. Supply of LOCK WASHER for pump model No.80X50 UCW M-25 part no -136.

Supply of LOCK WASHER for pump model No.80X50 UCW M-25 part no -136.

Qty:2
Unit:nos
180
8.

8. Supply of Bearing cover with bearing gaurd type for DRIVEN END for pump model No.80X50 UCW M-25

Supply of Bearing cover with bearing gaurd type for DRIVEN END for pump model No.80X50 UCW M-25

Qty:2
Unit:nos
180
9.

9. Supply of Bearing cover with bearing gaurd type for Non DRIVEN END, for pump model No.80X50 UCW M-25

Supply of Bearing cover with bearing gaurd type for Non DRIVEN END, for pump model No.80X50 UCW M-25

Qty:2
Unit:nos
180
10.

10. Supply of Gland cover- II for pump model No.80X50 UCW M-25 part no. 018-2

Supply of Gland cover- II for pump model No.80X50 UCW M-25 part no. 018-2

Qty:3
Unit:nos
180
11.

11. Supply of Gland cover-I for pump model No.80X50 UCW M-25 part no. 018-1

Supply of Gland cover-I for pump model No.80X50 UCW M-25 part no. 018-1

Qty:4
Unit:nos
180
12.

12. Supply of CASE Wear RING for pump model No.80X50 UCW M-25, PART No. 107-2

Supply of CASE Wear RING for pump model No.80X50 UCW M-25, PART No. 107-2

Qty:4
Unit:nos
180
13.

13. Supply of IMPELLER WEAR RING for pump model No.80X50 UCW M-25 PART NO. 025-2.

Supply of IMPELLER WEAR RING for pump model No.80X50 UCW M-25 PART NO. 025-2.

Qty:4
Unit:nos
180

General Information

Item Category
1. Supply of IMPELLER for pump model No.80X50 UCW M-25, Part No 21. , 2. Supply of IMPELLER WEAR RING for pump model No.80X50 UCW M-25, Part No 025.1. , 3. Supply of SHAFT WITH KEYS, Impeller and coupling, for pump model No.80X50 UCW M-25, Part Nos. 31,039-1 and 039.2 respectively. , 4. Supply of IMPELLER NUT for pump model No.80X50 UCW M-25, Part No 048 , 5. Supply of GASKET SLEEVE for pump model No.80X50 UCW M-25, Part No.117.2. , 6. Supply of BEARING NUT for pump model No.80X50 UCW M-25 part no - 129. , 7. Supply of LOCK WASHER for pump model No.80X50 UCW M-25 part no -136. , 8. Supply of Bearing cover with bearing gaurd type for DRIVEN END for pump model No.80X50 UCW M-25 , 9. Supply of Bearing cover with bearing gaurd type for Non DRIVEN END, for pump model No.80X50 UCW M-25 , 10. Supply of Gland cover- II for pump model No.80X50 UCW M- 25 part no. 018-2 , 11. Supply of Gland cover-I for pump model No.80X50 UCW M-25 part no. 018-1 , 12. Supply of CASE Wear RING for pump model No.80X50 UCW M-25, PART No. 107-2 , 13. Supply of IMPELLER WEAR RING for pump model No.80X50 UCW M-25 PART NO. 025-2.
Ministry Name
PMO
Department Name
Department of Atomic Energy
Organisation Name
Nuclear Power Corporation Of India Limited

Financial Information

EMD Amount
₹55,253.00
Bid Offer Validity
120 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
7 Days

Tender Documents

5 Documents
GeM-Bidding-7918337.pdfMain Document
BOQ DocumentBOQ BOQ
BOQ DocumentBOQ BOQ
Buyer uploaded ATC documentATC APPENDIX
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Similar Tenders

View All

HP CYLINDER Part No.-2791020150 by 2791021550,HP PISTON ASSEMBLY Part No.-2791031550,HP PISTON AND

GEM
Goods
Qty:2,668
6 Files
Nlc India Limited
Boq › Boql
HP CYLINDER Part No.-2791020150 by 2791021550 , HP PISTON ASSEMBLY Part No.-2791031550 , HP PISTON AND PISTON ROD WITH RING ASSEMBLY FOR KIRLOSKAR MAKE AIR COMPRESSOR MODEL T-BTD-J2M Part No.-2481035550 , CROSS HEAD FOR KIRLOSKAR AIR COMPRESSO MODEL T- BTD-J2M Part No.-2461032650 , MAIN BEARING HALF FOR AIR COMPRESSOR MODEL- T-BTD-J2M ONE NUMBER CONSISTS OF TWO HALFS , SPARES FOR KIRLOSKAR MAKE AIR COMPRESS OF MODEL T-BTD-J2M. ASSEMBLY OF 6 PIECES PACKING WITH GART SPRING , SPARES FOR KIRLOSKAR MAKE AIR COMPRESS OF MODEL T-BTD-J2M. ASSEMBLY OF 3 PIECES PACKING WITH GART SPRING , PRESSURE BREAKER , Packing HP Cylinder to inner outer cover , AIR COMPRESS MODEL T-BTD-J2M OIL WIPER RING , OIL SEAL FOR CRANKSHAFT ON FLYWHEEL SIDE OF J2M , OIL SEAL FOR CRANKSHAFT OF FLYWHEEL SIDE OF PM MODEL , PISTON ROD HP , H P PISTON ROD - STAGE II -PM , VALVE SPRING HP SUCTION FOR KIRLOSK MAKE AIR COMPRESOR MODEL T-BTD-J2M Part No.-2460065550 , VALVE SPRING HP DELIVERY FOR KIRLOSKAR MAKE AIR COMPRESOR MODEL T- BTD- J2M Part No.-2460075550 by 2460067350 , COMPRESSOR MODELT-BTD-J2M O RING-HP SUCTION , COMPRESSOR MODELT-BTD-J2M O RING -HP DELIVERY Part No.-2460076050 , SPARES FOR KIRLOSKAR MAKE AIR COMPRESS MODELT- BTD- J2M. GASKET COPPER RING HP , KIRLOS.AIR COMPR.-LP PISTON RING Part No.-2791033550 , HP PISTON RING FOR KIRLOSKAR MAKE AIR COMPRESSOR MODEL T- BTD-J2M . SIZE-196X170X12.3 MM Part No.- 2480034050 , GUIDE RING-HP FOR KIRLOSKAR MAKE AIR COMPRESSOR MODEL - T-BTD-J2M SIZE-178X190X6 Part No.-2480038750 by 2480038751 , CIRCLIP FOR SUCTION VALVE OF LP-HP CYLINDER IN J2M AND HP CYLINDER IN OF PM MODEL COMPRESSORS. Old Material No- 712000030 Material Part No- 2460061150
June 14, 2025
July 5, 2025 at 3:00 PM
View Details

NECK RING, CF8M having Part No.1181CF8M,BEARING LOCK NUT and WASHER, MOC STD having Part No.3010302

₹35,100.00
GEM
Goods
Qty:33
6 Files
Mahanadi Coalfields Limited
ANGUL, ODISHA
Boq › Boql
NECK RING, CF8M having Part No.1181CF8M , BEARING LOCK NUT and WASHER, MOC STD having Part No.30103020 , BEARING HOUSING NDE,CI having Part No.2764 , BEARING HOUSING DE, CI having Part No. 2761 , SHAFT WITH KEY having Part No.1800 , GLAND CI having Part No.2310 , SLEEVE NUT L.H MOC-SS410 having Part No.3032 , SHAFT SLEEVE, SS410 having Part No.2100SS410 , O-RING RUBBER having Part No. 4250 , THRUST COLLAR STEEL having Part No.2884 , LANTERN RING CF8M having Part No. 2300 , STUFFING BOX BUSH MOC CF8M having Part No.2402 , IMPELLER, CF8M having Part No.1500CF8M , WATER DEFLECTOR RUBBER having Part No.2070 , ROTATING ASSEMBLY COMPLETE , CF8M having Part No.1100
June 13, 2025
July 4, 2025 at 12:00 PM
View Details

IMPELLER 1ST STAG,IMPELLER 2ND STAGE CI 158 DSM-5B,PUMP SHAFT CS IS HOT RLD,WEAR RING CI,INTERSTAGE

₹38,600.00
GEM
Goods
Qty:134
6 Files
Mahanadi Coalfields Limited
ANGUL, ODISHA
Boq › Boql
IMPELLER 1ST STAG , IMPELLER 2ND STAGE CI 158 DSM-5B , PUMP SHAFT CS IS HOT RLD , WEAR RING CI , INTERSTAGE RING CS IS , LANTERN RING,CI , SPLIT GLAND CI , LIQUID DEFLECTOR MOC RUBBER , BEARING CARTRIDGE DE CI , BEARING CARTRIDGE NDE 253 CI DSM-5B , BEARING COVER , SHAFT SLEEVE CI , DISTANCE SLEEVE CI , ROUND LOCK NUT CI IS 1570 HOT RLD , THROAT BUSH CI , INTERSTAGE DIAPHRAGM CI , PROTECTION COVER STEEL , SET OF GASKET , SET OF KEYS ST ST 410 , SET OF O RING RUBBER , ROTATING ASSEMBLY CI FITTED , TOP and BOTTOM ASSLY CI
June 13, 2025
July 4, 2025 at 12:00 PM
View Details

INPUT SHAFT BEARING COVER having Part No 55508,1ST STAGE GEAR and PINION WITH INTEGRAL SFT having P

₹64,100.00
GEM
Goods
Qty:33
6 Files
Mahanadi Coalfields Limited
ANGUL, ODISHA
Boq › Boql
INPUT SHAFT BEARING COVER having Part No 55508 , 1ST STAGE GEAR and PINION WITH INTEGRAL SFT having Part No 1118D5508 , INPUT PINION SHAFT BEARING having Part No 145508 , JAW CLUTCH DRIVING PART and DRIVEN PART having Part No 44455508 , BEARING CARTRIDGE FOR DRIVE DRUM having Part No 555508 , COVER FOR CARTRIDGE FOR DRIVE DRUM having Part No 585508 , GREASE RETAINING PLATE having Part No 605508 , 1 ST STAGE GEAR AND PINION IN SET 25 having Part No 118C9010 , INPUT PINION SHAFT BEARING having Part No 149010 , JAW CLUTCH DRIVING AND DRIVEN having Part No 444590 , EQUALIZING GEAR IN SET OF 2 NOS having Part No 5290110 , GREASE RETAINING PLATE having Part No 609010
June 12, 2025
July 3, 2025 at 2:00 PM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity, demonstrating previous experience in conveying industrial pumps or similar components, and compliance with necessary industry regulations. Bidders should also provide proof of credentials and a well-structured business setup to ensure their capacity to fulfill the contract obligations.

The required technical specifications demand that all components must be compatible with the pump model 80X50 UCW M-25. This includes certain measurements, tolerances, and certifications regarding materials used. Bidders must provide detailed documentation confirming that their offerings align with these specifications to ensure compliance and performance.

An Earnest Money Deposit (EMD) is a mandatory requirement for participation, which indicates the seriousness of the bidder. The EMD amount will be specified in the tender document, and it is essential to adhere to these guidelines to facilitate a smooth bidding process. Failure to comply may lead to disqualification from the tender process.

Document submission for this tender must be done electronically through the specified online portal provided in the tender announcements. Bidders should ensure that all documents, including technical and financial proposals, are complete and submitted before the deadline to avoid any issues.

The tender includes special provisions aimed at supporting Micro, Small, and Medium Enterprises (MSEs). These may include relaxed eligibility criteria, reduced fees, and enhanced evaluation criteria that favor MSE participation, encouraging diversity and competitiveness in the tendering process.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders