Department of Atomic Energy Tender by Irel (india) Limited (1820069)

HDPE pipe as per IS - 4984-1995, 381 mm ID, 450 mm OD, 3000 mm long with long neck pipe end and GI

Goods
Qty:113
EMD: ₹32,337
EST Bid: ₹19.1 Lakh

Tender Timeline

Tender Issue
June 14, 2025 at 9:25 AM

Tender BOQ Items

12 Items
1.

HDPE pipe as per IS - 4984-1995, 381 mm ID, 450 mm OD, 3000 mm long with long neck pipe end and GI slip on flange 20 mm thick at both ends as per IS - 2062 as per technical specification

Qty:2
Unit:numbers
90
2.

HDPE pipe as per IS - 4984-1995, 381 mm ID, 450 mm OD, 1320 mm long with long neck pipe end and GI slip on flange 20 mm thick at both ends as per IS - 2062 as per technical specification

Qty:2
Unit:numbers
90
3.

HDPE suction piece for SMP scavanging pump, 225 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04-M-362

Qty:10
Unit:numbers
90
4.

HDPE suction piece for output bin for SMP, 180 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04-M-363, Item Sl. No. 1

Qty:10
Unit:numbers
90
5.

HDPE suction piece for output bin for SMP, 180 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04-M-363, Item Sl. No. 2

Qty:16
Unit:numbers
90
6.

HDPE suction piece for output bin for SMP, 180 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04-M-363, Item Sl. No. 3

Qty:12
Unit:numbers
90
7.

HDPE suction piece for tails pump for SMP, 225 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04-M-364, Item No. 1

Qty:10
Unit:numbers
90
8.

HDPE suction piece for tails pump for SMP, 225 x 180 mm OD HDPE fabricated unequal Tee, PE 80 PN 6 welded with HDPE stub as per technical specification

HDPE suction piece for tails pump for SMP, 225 x 180 mm OD HDPE fabricated unequal Tee, PE 80 PN 6 welded with HDPE stub end and GI slip on flange on each end of Tee as per Drg No. OP-04-M-364, Item No. 2

Qty:10
Unit:numbers
90
9.

HDPE short piece for tails pump for SMP, 225 mm OD, 590 mm long HDPE fabricated PE 80 PN 6 welded with HDPE stub end and GI slip on flange at both ends as per Drg No. OP-04-M-364, Item No. 3

Qty:3
Unit:numbers
90
10.

HDPE suction piece for tails pump for SMP, 180 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at both ends as per Drg No. OP-04-M-364, Item No. 4

Qty:10
Unit:numbers
90
11.

HDPE suction piece for secondary rougher for SMP, 280 mm OD HDPE fabricated PE 80 PN 6 as per Drg No. OP-04-M-627, Item No. 1

Qty:14
Unit:numbers
90
12.

HDPE short piece for secondary rougher for SMP, 280 mm OD, 290 mm long HDPE fabricated PE 80 PN 6 welded with HDPE stub end and GI slip on flange at both ends as per Drg No- OP-04-M-627, Item No - 2

HDPE short piece for secondary rougher for SMP, 280 mm OD, 290 mm long HDPE fabricated PE 80 PN 6 welded with HDPE stub end and GI slip on flange at both ends as per Drg No. OP-04-M-627, Item No. 2

Qty:14
Unit:numbers
90

General Information

Item Category
HDPE pipe as per IS - 4984-1995, 381 mm ID, 450 mm OD, 3000 mm long with long neck pipe end and GI slip on flange 20 mm thick at both ends as per IS - 2062 as per technical specification , HDPE pipe as per IS - 4984-1995, 381 mm ID, 450 mm OD, 1320 mm long with long neck pipe end and GI slip on flange 20 mm thick at both ends as per IS - 2062 as per technical specification , HDPE suction piece for SMP scavanging pump, 225 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04-M-362 , HDPE suction piece for output bin for SMP, 180 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04- M-363, Item Sl. No. 1 , HDPE suction piece for output bin for SMP, 180 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04-M-363, Item Sl. No. 2 , HDPE suction piece for output bin for SMP, 180 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04-M-363, Item Sl. No. 3 , HDPE suction piece for tails pump for SMP, 225 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at one end as per Drg No. OP-04-M-364, Item No. 1 , HDPE suction piece for tails pump for SMP, 225 x 180 mm OD HDPE fabricated unequal Tee, PE 80 PN 6 welded with HDPE stub as per technical specification , HDPE short piece for tails pump for SMP, 225 mm OD, 590 mm long HDPE fabricated PE 80 PN 6 welded with HDPE stub end and GI slip on flange at both ends as per Drg No. OP-04-M-364, Item No. 3 , HDPE suction piece for tails pump for SMP, 180 mm OD HDPE fabricated 90 deg bend, PE 80 PN 6 welded with HDPE stub end and GI slip on flange at both ends as per Drg No. OP-04-M-364, Item No. 4 , HDPE suction piece for secondary rougher for SMP, 280 mm OD HDPE fabricated PE 80 PN 6 as per Drg No. OP-04-M-627, Item No. 1 , HDPE short piece for secondary rougher for SMP, 280 mm OD, 290 mm long HDPE fabricated PE 80 PN 6 welded with HDPE stub end and GI slip on flange at both ends as per Drg No- OP-04-M-627, Item No - 2
Ministry Name
PMO
Department Name
Department of Atomic Energy
Organisation Name
Irel (india) Limited

Financial Information

Estimated Bid Value
₹19,07,895.00
EMD Amount
₹32,337.00
Minimum Turnover
₹5.00 Lakh (s)
Bid Offer Validity
90 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
3 Days

Tender Documents

13 Documents
GeM-Bidding-7953829.pdfMain Document
Technical Specification/Buyer Specification DocumentTECHNICAL TECHNICAL
BOQ DocumentBOQ BOQ
BOQ DocumentBOQ BOQ
Buyer uploaded ATC documentATC ATC
Other DocumentsOTHER
Other DocumentsOTHER
Other DocumentsOTHER
Other DocumentsOTHER
Other DocumentsOTHER
Other DocumentsOTHER
Other DocumentsOTHER
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Bidder Turnover
  • Certificate (Requested in ATC)
  • Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

Polyethylene Pipes for Water Supply,HDPE Stub End, Size - 630 mm, 500 mm length Long Neck,Rating PN

₹1,317.00
GEM
Goods
Qty:185
8 Files
Nuclear Power Corporation Of India Limited
TIRUNELVELI, TAMIL NADU
Dist › Pipe › Comm
Polyethylene Pipes for Water Supply (Q4) , HDPE Stub End, Size - 630 mm, 500 mm length Long Neck,Rating PN 8, PE 100 As per IS 8008 - 2003, , HDPE Stub End, Size 225 mm PE 100 PN 8 As per IS 8008 -2003 , Reducer , HDPE , PE-100 PN-8 , Size - 25 inch x 20 inch 630 mm x 500mm As per IS 8008 - 2003 , HDPE reducer of size-315mm X 225mm with rating PN8, PE100As per IS 8008 - 2003 , HDPE reducer of size-160mm X 110mm with rating PN8, PE100As per IS 8008 - 2003 , HDPE reducer of size-110mm X 63mm with rating PN8, PE100 Asper IS 8008 - 2003 , HDPE reducing Tee of size-315mm X 225mm with rating PN8,PE100 As per IS 8008 - 2003 , HDPE Equal Tee, Size - 400 mm, Rating PN8, PE100 As per IS8008 - 2003 , HDPE Equal Tee of size-225mm with rating PN8, PE100 As perIS 8008 - 2003 , HDPE Equal Tee of size-160mm with rating PN8, PE100 As perIS 8008 - 2003 , HDPE elbow 90 degree of size-225mm with rating PN8, PE100 Asper IS 8008 - 2003 , HDPE elbow 90 degree of size- 160mm with rating PN8, PE100 Asper IS 8008 - 2003 , HDPE elbow 90 degree of size-110mm with rating PN8, PE100 Asper IS 8008 - 2003 , HDPE stub end of size-450mm with Sandwich Flange with ratingPN8, PE100 As per IS 8008 - 2003 , HDPE stub end of size-500mm with Sandwich Flange with ratingPN8, PE100 As per IS 8008 - 2003 , HDPE stub end of size-160mm with Sandwich Flange with ratingPN8, PE100 As per IS 8008 - 2003 , HDPE Equal Tee of size- 110mm with rating PN8, PE100 As perIS 8008 - 2003 , HDPE Elbow 90 degree, Size - 630 mm, Rating PN8, PE100 630mm HDPE 90 degree elbow PN 8 PE 100 IS 8008-2003 , HDPE elbow 90 degree of size-450mm with rating PN8, PE100 Asper IS 8008 - 2003 , HDPE Elbow 90 degree, Size - 500 mm, Rating PN8, PE100 Asper IS 8008 - 2003
June 12, 2025
July 3, 2025 at 11:00 AM
View Details

5008054 HDEP PIPE 140 MM OD WITH BOTH SIDE COLLAR AND MS FLANGES IS 49841995 PE 100 PN10 IN 6 MTR L

GEM
Goods
Qty:175
6 Files
Irel (india) Limited
KANYAKUMARI, TAMIL NADU
Boq › Boql
5008054 HDEP PIPE 140 MM OD WITH BOTH SIDE COLLAR AND MS FLANGES IS 49841995 PE 100 PN10 IN 6 MTR LENGTH WITH BOTH SIDES COLLAR AND MS FLANGE FIXED WELDED , 5008053 HDPE PIPE CONFORMING TO IS 49841995 MATERIAL GRADE PE100 PRESSURE RATING PN10 IN 6 MTR LENGTH OF SIZE 110 MM OD , 5008057 HDPE PIPE 160 MM OD WITH BOTH SIDE COLLAR AND MS FLANGE IS 4984 1995 PE 100 PN 10 IN 6 MTR , 5008009 HDPE PIPES CONFORMING TO IS 4984 1995 MATERIAL GRADEPE100 PRESSURE RATINGPN10 IN 6 MTR LENGTH OF SIZE 110 MM OD , 5008022 HDPE PIPES CONFORMING TO IS4984 1995 MATERIAL GRADEPE100 PRESSURE RATING PN8 IN 6 MTR LENGTH OF SIZE 140 MM OD
May 29, 2025
June 19, 2025 at 12:00 PM
View Details

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders