IoT Lab Equipment - GEM/2025/B/6351628

Arduino Uno or equivalent,Arduino Nano or equivalent,Arduino Mega or equivalent,Raspberry Pi 3 Mode

Goods
Qty:9,525
EMD: ₹80,000

Tender Timeline

Tender Issue
June 17, 2025 at 3:55 PM

Tender Description

IoT Lab Equipment - 5b136586

The Department of Higher Education, under the Ministry of Education, invites bids for the procurement of IoT Lab Equipment. This tender aims at enhancing educational resources within institutions through the provision of various electronic components and modules primarily focusing on the Internet of Things (IoT) systems.

Scope of Work and Objectives

The primary scope of this tender is to supply a comprehensive set of IoT Lab Equipment that includes, but is not limited to, components such as Arduino Uno, Arduino Nano, Arduino Mega, and Raspberry Pi 3 Model B Plus, along with additional tools and modules to facilitate advanced learning and experimentation in the field of IoT. The objectives are to empower students and educators with hands-on experience that aligns with modern technological standards and fosters innovation in this rapidly evolving field.

Tender BOQ Items

153 Items
1.

Arduino Uno or equivalent

As per specification in equipment list

Qty:30
Unit:numbers
15
2.

Arduino Nano or equivalent

As per specification in equipment list

Qty:10
Unit:numbers
15
3.

Arduino Mega or equivalent

As per specification in equipment list

Qty:10
Unit:numbers
15
4.

Raspberry Pi 3 Model B Plus

As per specification in equipment list

Qty:5
Unit:numbers
15
5.

Breadboards and Mini Breadboard

As per specification in equipment list

Qty:70
Unit:numbers
15
6.

General Purpose solderable Board

As per specification in equipment list

Qty:60
Unit:numbers
15
7.

Berg Strips

As per specification in equipment list

Qty:60
Unit:numbers
15
8.

16x2 LCD display

As per specification in equipment list

Qty:20
Unit:numbers
15
9.

USB Cables

As per specification in equipment list

Qty:10
Unit:numbers
15
10.

USB Cables

As per specification in equipment list

Qty:10
Unit:numbers
15
11.

Battery

As per specification in equipment list

Qty:10
Unit:numbers
15
12.

Resistor Kit

As per specification in equipment list

Qty:20
Unit:numbers
15
13.

Capacitor Kit

As per specification in equipment list

Qty:20
Unit:numbers
15
14.

Linear Voltage Regulator

As per specification in equipment list

Qty:30
Unit:numbers
15
15.

Water Pump module

As per specification in equipment list

Qty:4
Unit:numbers
15
16.

Piezoelectric Plate

As per specification in equipment list

Qty:30
Unit:numbers
15
17.

8 by 8 LED Matrix Module

As per specification in equipment list

Qty:10
Unit:numbers
15
18.

Bluetooth module

As per specification in equipment list

Qty:15
Unit:numbers
15
19.

7 Segment Led Display

As per specification in equipment list

Qty:20
Unit:numbers
15
20.

GSM

As per specification in equipment list

Qty:4
Unit:numbers
15
21.

GPS

As per specification in equipment list

Qty:4
Unit:numbers
15
22.

Laser Diode Emitter

As per specification in equipment list

Qty:10
Unit:numbers
15
23.

LDR Module

As per specification in equipment list

Qty:30
Unit:numbers
15
24.

Keypad

As per specification in equipment list

Qty:10
Unit:numbers
15
25.

JoyStick

As per specification in equipment list

Qty:10
Unit:numbers
15
26.

Active Buzzer

As per specification in equipment list

Qty:80
Unit:numbers
15
27.

Motor driver Module

As per specification in equipment list

Qty:10
Unit:numbers
15
28.

Sound Playback Module

As per specification in equipment list

Qty:10
Unit:numbers
15
29.

DC Plastic Gear motor with wheel

As per specification in equipment list

Qty:40
Unit:numbers
15
30.

Node MCU

As per specification in equipment list

Qty:6
Unit:numbers
15
31.

WeMos D1 R2

As per specification in equipment list

Qty:6
Unit:numbers
15
32.

Vibrating Motor

As per specification in equipment list

Qty:20
Unit:numbers
15
33.

Alligator Connectors

As per specification in equipment list

Qty:200
Unit:numbers
15
34.

Battery clips with DC Jack

As per specification in equipment list

Qty:40
Unit:numbers
15
35.

Hook-up Wires

As per specification in equipment list

Qty:4
Unit:numbers
15
36.

Jumper Cable

As per specification in equipment list

Qty:2000
Unit:numbers
15
37.

RGB LEDs

As per specification in equipment list

Qty:400
Unit:numbers
15
38.

LEDs Red

As per specification in equipment list

Qty:1000
Unit:numbers
15
39.

LEDs Green

As per specification in equipment list

Qty:1000
Unit:numbers
15
40.

LEDs Blue

As per specification in equipment list

Qty:1000
Unit:numbers
15
41.

LEDs Yellow

As per specification in equipment list

Qty:1000
Unit:numbers
15
42.

LEDs White

As per specification in equipment list

Qty:1000
Unit:numbers
15
43.

Timer IC LM 555

As per specification in equipment list

Qty:30
Unit:numbers
15
44.

Atmega16u2

As per specification in equipment list

Qty:10
Unit:numbers
15
45.

Diodes and Transistors Kit

As per specification in equipment list

Qty:3
Unit:numbers
15
46.

Button Switch Set

As per specification in equipment list

Qty:3
Unit:numbers
15
47.

Capacitative touch Module

As per specification in equipment list

Qty:20
Unit:numbers
15
48.

Capacitative Touch Switch Module

As per specification in equipment list

Qty:10
Unit:numbers
15
49.

IR Sensors, Obstacle avoider sensor module

As per specification in equipment list

Qty:20
Unit:numbers
15
50.

Triple Axis Magnetometer

As per specification in equipment list

Qty:10
Unit:numbers
15
51.

Humidity Sensor

As per specification in equipment list

Qty:10
Unit:numbers
15
52.

MQ Series

As per specification in equipment list

Qty:24
Unit:numbers
15
53.

IR transmitter or receiver

As per specification in equipment list

Qty:10
Unit:numbers
15
54.

Ultrasonic Sensor Module HC SR 04 or compatible

As per specification in equipment list

Qty:40
Unit:numbers
15
55.

Triple Axis accelerometer

As per specification in equipment list

Qty:10
Unit:numbers
15
56.

PIR Motion Detector Module

As per specification in equipment list

Qty:20
Unit:numbers
15
57.

Pulse Rate Heart Sensor

As per specification in equipment list

Qty:4
Unit:numbers
15
58.

Relay Module

As per specification in equipment list

Qty:20
Unit:numbers
15
59.

Relay Module

As per specification in equipment list

Qty:20
Unit:numbers
15
60.

Big Sound microphone module

As per specification in equipment list

Qty:10
Unit:numbers
15
61.

Big Sound microphone module

As per specification in equipment list

Qty:10
Unit:numbers
15
62.

Soil Moisture Sensor module

As per specification in equipment list

Qty:6
Unit:numbers
15
63.

Touch Sensor

As per specification in equipment list

Qty:6
Unit:numbers
15
64.

Metal Touch Sensor Module

As per specification in equipment list

Qty:6
Unit:numbers
15
65.

Rain Drop Sensor

As per specification in equipment list

Qty:6
Unit:numbers
15
66.

Flex Sensor

As per specification in equipment list

Qty:6
Unit:numbers
15
67.

Temperature Sensor

As per specification in equipment list

Qty:6
Unit:numbers
15
68.

Temperature and humidity sensor module

As per specification in equipment list

Qty:40
Unit:numbers
15
69.

Force Pressure Sensor

As per specification in equipment list

Qty:4
Unit:numbers
15
70.

Colour Recognition Sensor

As per specification in equipment list

Qty:4
Unit:numbers
15
71.

Water Flow Sensor

As per specification in equipment list

Qty:4
Unit:numbers
15
72.

Sound Sensor

As per specification in equipment list

Qty:10
Unit:numbers
15
73.

IR Sensors Array module for Line Following

As per specification in equipment list

Qty:10
Unit:numbers
15
74.

Power Bank

As per specification in equipment list

Qty:5
Unit:numbers
15
75.

RFID Reader Tags

As per specification in equipment list

Qty:10
Unit:numbers
15
76.

RF Modules Tx and Rx 315 MHz ASK

As per specification in equipment list

Qty:10
Unit:numbers
15
77.

Stepper motor with Driver board

As per specification in equipment list

Qty:10
Unit:numbers
15
78.

DC motor

As per specification in equipment list

Qty:20
Unit:numbers
15
79.

Servo motors

As per specification in equipment list

Qty:70
Unit:numbers
15
80.

150 RPM BO Motor

As per specification in equipment list

Qty:10
Unit:numbers
15
81.

L298P Motor Driver

As per specification in equipment list

Qty:10
Unit:numbers
15
82.

Servo Motor Tester

As per specification in equipment list

Qty:4
Unit:numbers
15
83.

Robotics DIY Kit

As per specification in equipment list

Qty:3
Unit:numbers
15
84.

Mechanical Modular Construction kit

As per specification in equipment list

Qty:5
Unit:numbers
15
85.

Drone Kit

As per specification in equipment list

Qty:1
Unit:numbers
15
86.

Aerospace Kit

As per specification in equipment list

Qty:1
Unit:numbers
15
87.

Automobile Kit

As per specification in equipment list

Qty:1
Unit:numbers
15
88.

Bio Medical Kit

As per specification in equipment list

Qty:1
Unit:numbers
15
89.

Agri Tech Kit

As per specification in equipment list

Qty:1
Unit:numbers
15
90.

Water Sanitation Kit

As per specification in equipment list

Qty:1
Unit:numbers
15
91.

Bio Tech Kit

As per specification in equipment list

Qty:1
Unit:numbers
15
92.

Other Potential STEM Application Kit

As per specification in equipment list

Qty:1
Unit:numbers
15
93.

3D Printer Kit and tools

As per specification in equipment list

Qty:1
Unit:numbers
15
94.

Dedicated UPS or Power back up

As per specification in equipment list

Qty:1
Unit:numbers
15
95.

Filament for 3D printer

As per specification in equipment list

Qty:5
Unit:numbers
15
96.

Filament Storage Box

As per specification in equipment list

Qty:5
Unit:numbers
15
97.

Set of Arts and Crafts Accessories e.g. stationary items

As per specification in equipment list

Qty:217
Unit:numbers
15
98.

Hacksaw Frame

As per specification in equipment list

Qty:1
Unit:numbers
15
99.

Hacksaw blades

As per specification in equipment list

Qty:10
Unit:numbers
15
100.

Mini Hacksaw Frame

As per specification in equipment list

Qty:1
Unit:numbers
15
101.

Mini Hacksaw blades

As per specification in equipment list

Qty:10
Unit:numbers
15
102.

Pliers 4.5 inch size

As per specification in equipment list

Qty:7
Unit:numbers
15
103.

Tweezer Set

As per specification in equipment list

Qty:2
Unit:numbers
15
104.

Ball Pein Hammer

As per specification in equipment list

Qty:1
Unit:numbers
15
105.

Steel Shaft Claw Hammer

As per specification in equipment list

Qty:1
Unit:numbers
15
106.

C Clamp

As per specification in equipment list

Qty:4
Unit:numbers
15
107.

Allen Key Set

As per specification in equipment list

Qty:1
Unit:numbers
15
108.

Drill Machine Set

As per specification in equipment list

Qty:1
Unit:numbers
15
109.

Drilling Workstation

As per specification in equipment list

Qty:1
Unit:numbers
15
110.

Spanner Set

As per specification in equipment list

Qty:1
Unit:numbers
15
111.

Vice Normal

As per specification in equipment list

Qty:1
Unit:numbers
15
112.

Precision Screw Driver Set

As per specification in equipment list

Qty:2
Unit:numbers
15
113.

Wrench

As per specification in equipment list

Qty:2
Unit:numbers
15
114.

Wire Strippers

As per specification in equipment list

Qty:5
Unit:numbers
15
115.

Screwdriver

As per specification in equipment list

Qty:3
Unit:numbers
15
116.

Cordless Rotary Multitool Set

As per specification in equipment list

Qty:1
Unit:numbers
15
117.

Air Blower

As per specification in equipment list

Qty:1
Unit:numbers
15
118.

Drill Bit Set

As per specification in equipment list

Qty:1
Unit:numbers
15
119.

File set

As per specification in equipment list

Qty:1
Unit:numbers
15
120.

Mini File set

As per specification in equipment list

Qty:1
Unit:numbers
15
121.

Flexible Cutting Mat

As per specification in equipment list

Qty:1
Unit:numbers
15
122.

Plastic Storage Drawer or Organiser

As per specification in equipment list

Qty:2
Unit:numbers
15
123.

Pegboard

As per specification in equipment list

Qty:2
Unit:numbers
15
124.

Hot glue gun

As per specification in equipment list

Qty:4
Unit:numbers
15
125.

Digital Oscilloscope

As per specification in equipment list

Qty:1
Unit:numbers
15
126.

Soldering Kit

As per specification in equipment list

Qty:4
Unit:numbers
15
127.

Adapters

As per specification in equipment list

Qty:10
Unit:numbers
15
128.

Adapters

As per specification in equipment list

Qty:10
Unit:numbers
15
129.

Electric Screw Driver Set

As per specification in equipment list

Qty:1
Unit:numbers
15
130.

Dual Temperature Heat Gun

As per specification in equipment list

Qty:1
Unit:numbers
15
131.

Soldering Helping hand

As per specification in equipment list

Qty:4
Unit:numbers
15
132.

Return measuring tape

As per specification in equipment list

Qty:2
Unit:numbers
15
133.

Stainless Steel Rule

As per specification in equipment list

Qty:5
Unit:numbers
15
134.

Digital Vernier Calliper

As per specification in equipment list

Qty:2
Unit:numbers
15
135.

Spirit Level

As per specification in equipment list

Qty:1
Unit:numbers
15
136.

Digital Pen electric Tester

As per specification in equipment list

Qty:1
Unit:numbers
15
137.

Digital Multi Meter

As per specification in equipment list

Qty:5
Unit:numbers
15
138.

DIY Paper Microscope

As per specification in equipment list

Qty:5
Unit:numbers
15
139.

Telescope

As per specification in equipment list

Qty:1
Unit:numbers
15
140.

Sewing Kit

As per specification in equipment list

Qty:1
Unit:numbers
15
141.

Glue Sticks

As per specification in equipment list

Qty:100
Unit:numbers
15
142.

Nuts and Bolts and screw

As per specification in equipment list

Qty:40
Unit:numbers
15
143.

Cable Tie

As per specification in equipment list

Qty:30
Unit:numbers
15
144.

Sand Paper

As per specification in equipment list

Qty:10
Unit:numbers
15
145.

Power Strip Adaptors

As per specification in equipment list

Qty:5
Unit:numbers
15
146.

Bulb Holders

As per specification in equipment list

Qty:10
Unit:numbers
15
147.

Electric Wires

As per specification in equipment list

Qty:20
Unit:meters
15
148.

USB TO DC jack cable

As per specification in equipment list

Qty:10
Unit:numbers
15
149.

First Aid Kit

As per specification in equipment list

Qty:2
Unit:numbers
15
150.

Fire extinguisher handy units

As per specification in equipment list

Qty:2
Unit:numbers
15
151.

Safety goggles with or without LED torch

As per specification in equipment list

Qty:30
Unit:numbers
15
152.

Safety Gloves Pairs

As per specification in equipment list

Qty:10
Unit:numbers
15
153.

Safety Mask

As per specification in equipment list

Qty:20
Unit:numbers
15

General Information

Item Category
Arduino Uno or equivalent , Arduino Nano or equivalent , Arduino Mega or equivalent , Raspberry Pi 3 Model B Plus , Breadboards and Mini Breadboard , General Purpose solderable Board , Berg Strips , 16x2 LCD display , USB Cables , Battery , Resistor Kit , Capacitor Kit , Linear Voltage Regulator , Water Pump module , Piezoelectric Plate , 8 by 8 LED Matrix Module , Bluetooth module , 7 Segment Led Display , GSM , GPS , Laser Diode Emitter , LDR Module , Keypad , JoyStick , Active Buzzer , Motor driver Module , Sound Playback Module , DC Plastic Gear motor with wheel , Node MCU , WeMos D1 R2 , Vibrating Motor , Alligator Connectors , Battery clips with DC Jack , Hook-up Wires , Jumper Cable , RGB LEDs , LEDs Red , LEDs Green , LEDs Blue , LEDs Yellow , LEDs White , Timer IC LM 555 , Atmega16u2 , Diodes and Transistors Kit , Button Switch Set , Capacitative touch Module , Capacitative Touch Switch Module , IR Sensors, Obstacle avoider sensor module , Triple Axis Magnetometer , Humidity Sensor , MQ Series , IR transmitter or receiver , Ultrasonic Sensor Module HC SR 04 or compatible , Triple Axis accelerometer , PIR Motion Detector Module , Pulse Rate Heart Sensor , Relay Module , Big Sound microphone module , Soil Moisture Sensor module , Touch Sensor , Metal Touch Sensor Module , Rain Drop Sensor , Flex Sensor , Temperature Sensor , Temperature and humidity sensor module , Force Pressure Sensor , Colour Recognition Sensor , Water Flow Sensor , Sound Sensor , IR Sensors Array module for Line Following , Power Bank , RFID Reader Tags , RF Modules Tx and Rx 315 MHz ASK , Stepper motor with Driver board , DC motor , Servo motors , 150 RPM BO Motor , L298P Motor Driver , Servo Motor Tester , Robotics DIY Kit , Mechanical Modular Construction kit , Drone Kit , Aerospace Kit , Automobile Kit , Bio Medical Kit , Agri Tech Kit , Water Sanitation Kit , Bio Tech Kit , Other Potential STEM Application Kit , 3D Printer Kit and tools , Dedicated UPS or Power back up , Filament for 3D printer , Filament Storage Box , Set of Arts and Crafts Accessories e.g. stationary items , Hacksaw Frame , Hacksaw blades , Mini Hacksaw Frame , Mini Hacksaw blades , Pliers 4.5 inch size , Tweezer Set , Ball Pein Hammer , Steel Shaft Claw Hammer , C Clamp , Allen Key Set , Drill Machine Set , Drilling Workstation , Spanner Set , Vice Normal , Precision Screw Driver Set , Wrench , Wire Strippers , Screwdriver , Cordless Rotary Multitool Set , Air Blower , Drill Bit Set , File set , Mini File set , Flexible Cutting Mat , Plastic Storage Drawer or Organiser , Pegboard , Hot glue gun , Digital Oscilloscope , Soldering Kit , Adapters , Electric Screw Driver Set , Dual Temperature Heat Gun , Soldering Helping hand , Return measuring tape , Stainless Steel Rule , Digital Vernier Calliper , Spirit Level , Digital Pen electric Tester , Digital Multi Meter , DIY Paper Microscope , Telescope , Sewing Kit , Glue Sticks , Nuts and Bolts and screw , Cable Tie , Sand Paper , Power Strip Adaptors , Bulb Holders , Electric Wires , USB TO DC jack cable , First Aid Kit , Fire extinguisher handy units , Safety goggles with or without LED torch , Safety Gloves Pairs , Safety Mask
Ministry Name
Ministry of Education
Department Name
Department of Higher Education
Organisation Name
National Institute Of Technology (nit)

Financial Information

EMD Amount
₹80,000.00
Bid Offer Validity
180 (Days)
Past Performance
40 %
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
RA Qualification Rule
H1-Highest Priced Bid Elimination
Inspection Required
Yes
Technical Clarifications Time
2 Days

Tender Documents

5 Documents
GeM-Bidding-7974972.pdfMain Document
BOQ DocumentBOQ BOQ
BOQ DocumentBOQ BOQ
Buyer uploaded ATC documentATC ATC
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Experience Criteria
  • Past Performance
  • Bidder Turnover
  • Certificate (Requested in ATC)
  • Additional Doc 1 (Requested in ATC)
  • Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

SPV Module above 400 Wp,Ongrid Inverter,Mounting structure,Battery 12V 75 AH,Battery Stand,Battery

GEM
Goods
Qty:336
4 Files
Development Commissioner (micro Small & Medium Enterprises)
Boq › Boql
SPV Module above 400 Wp , Ongrid Inverter , Mounting structure , Battery 12V 75 AH , Battery Stand , Battery Interconnection wires and Lugs 10 meter , Solar Irradiation Meter , MC 4 series connectors , MC 4 parallel connectors Branch , Solar Grade DC cable 4 SQ mm 20 meter , Green yellow Earthing wire 6 sq. mm 20 meter , Cable ties UV protected 50,100,mm 2 packs , AC - DB , DCDB 3 in 3 out with SPD , Solar Panel 75 W 12 V , Charge Controler 12 V 5 A , Battery 12V, 20Ah , LED bulb 5 W , Solar Lantern 5 10W , Connecting Wires 10 mtr , Mechanical Fixtures , AC wire 3 core ACDB to Inverter 5meter , AC 3 core cable 2.5 sq. mm 30meter , Screw and PVC buffer for mounting ACDB and DCDB , Petroleum jelly for Battery terminal small 10 paks , Water level tube with holder 10 meter , Sprit level Magnetic base , Inclinometer Magnetic base , 30-meter fiber tape , Hammer screw driver , Tri square 8 inches , Metal measuring tape with level 5 m , Self adjusting Wire Stripping pliers , 30 meter Extension wire , Flat and Ring Spanner set , Torque wrench with adopter , Ball pin Hammer , Digital Multimeter , Digital AC and DC Clamp meter , Crimping Tool , Hammer Drill Machine , Set of drill bit for Concrete , Set of HSS drill bit for Metal , Cutting wheel and Grinding wheel , Hot gun Gas electric operated for sleeves , Pair of Solar MC 4 Connector Wrench Tools , Hydrometer , Battery Load tester , Digital Earth Tester , Cable Insulation tester Megger , Hand Gloves , Safety Jacket , Safety Full body Harness , Anti-slip safety shoes , Safety Goggles , Head Helmet Hard Hat , Anchor Lifeline , Safety Static Rope , First Aid Kit , SINAMICS G120C , SIEMENS G120 IOP 2 , 3 phase induction motor 1.5 kW 1.5 HP , SINAMICS V90 servo drive , SIMOTICS S-1FL6 Servo Motor , POWER CABLE FOR SERVO MOTOR , Siemens V90 Incremental Encoder Cable , Microstep driver DM542 , Stepper motor , Rotary Encoder Incremental PNP , Siemens HMI KTP400 Basic Touch Pane , Earthing Rod , Pyronometer , Wire gauge
June 13, 2025
July 4, 2025 at 6:00 PM
View Details

Measuring Steel Tape,Combination Plier Insulated,Screw Driver Insulated,Screw Driver Insulated,Elec

GEM
Goods
Qty:925
5 Files
Development Commissioner (micro Small & Medium Enterprises)
KHORDHA, ODISHA
Boq › Boql
Measuring Steel Tape , Combination Plier Insulated , Screw Driver Insulated , Electrician Screw Driver thin stem , Heavy Duty Screw Driver Insulated , Punch Centre , Knife Double Bladed Electrician , Neon Tester , Steel Rule Graduated both in Metric and English Unit , Hammer, cross peen with handle , Electrical Symbol and Accessories Charts , Pipe Vice Cast Iron with hardened jaw open type , Hand Vice , Hacksaw frame - with blade , File flat , File half round , File round , Pliers long nose insulated , Pliers flat nose insulated , Pliers, round nose insulated , D.E. metric Spanner Double Ended , Gauge, wire imperial stainless steel , Portable Electric Drill Machine , Crimping Tool , Pliers Side Cutting , Wire stripper adjustable length , Hammer, ball peen With handle , Scriber - Knurled centre position , Tool kit Box or bag portable , Allen Key - mm , Allen Key - Inch , Scissors blade , Electrical loads- set of Incandescent lamp, Tube light, CFL, LED light, Heater and Geyser , Wire Cutter and Stripper , Earth Plate - Copper Plate , Earth Plate - GI Plate , Earth Electrode , Tap set , Trolley for Transportation of Batteries , Die for Threading , Electrical wiring and switch gear rack , Protective relays and contactors rack , MCCB , ELCB , RCCB , Fuses , Cables - 1 Mtr Each , Three core wire , Battery cable , Hacksaw blades , Bolts, nuts, washers , Solar Insulation meter , Pyranometer , Pyrheliometer , Lux meter , Magnetic Flux Meter , Temperature controlled Soldering Iron , Sun Shine recorder , Weather monitoring station , Solar cell based sunlight radiation meter , Cut models of photo voltaic cell assembly , Cut model of Lead acid battery , Sun path finder , Solar energy trainer with grouping of solar cells , Solar tracker demonstrator kit , Solar PV e-learning software using animations for training , Motorized Bench Grinder , Solar photovoltaic module , Solar Charge controller with Dusk to Dawn automatic switching , Array junction box , Solar lantern with suitable solar panel , Home light system , Solar cell kit , Clinometer for Angle measurement , Anemometer , A.C. Voltmeter , Volt meter , Ammeter MC , Ammeter MC centre zero , Power Factor Meter , A.C. Energy Meter , Kilo Wattmeter , Digital Wattmeter , Frequency Meter , DC LED Lamp , DC Pump , PWM Controller , MPPT Charge Controller , Solar PCU Off grid , Solar Street Light , Solar, wind and hybrid power plant , Solar Traffic Light , Used water treatment solar plant demonstrator kit , Solar DC pump , Rechargeable battery , LED lights , Rubber gloves , Cotton gloves , Gum boots , Safety Goggles , Safety Helmet , First Aid kit , Working Bench , Wiring Board , Metal Rack
June 12, 2025
July 3, 2025 at 5:00 PM
View Details

Raspberry Pi 4 Model B 8 GB starter kit,RASPBERRY PI ZERO WH V2,OV5647 5MP 1080P IR Cut Camera,Rasp

GEM
Goods
Qty:840
5 Files
Centre For Development Of Advanced Computing (c-dac)
CHENNAI, TAMIL NADU
Boq › Boql
Raspberry Pi 4 Model B 8 GB starter kit , RASPBERRY PI ZERO WH V2 , OV5647 5MP 1080P IR Cut Camera , Raspberry Pi 5 Model 8GB Starter Kit , Raspberry Pi 5 Active Cooler , BeagleBone Black REV C , BeagleBone Black Industrial AM3358 , BeagleBone AI 64 , Arduino Nano 33 IOT with Header ABX00032 , Original Arduino Nano A000005 , Arduino Nano 33 Ble Sense with Header Rev 2 ABX00070 , Arduino UNO R4 WiFi ABX00087 , Original Arduino Uno Rev3 A000066 , Original Arduino Mega 2560 ATmega2560 MCU Rev3 A000067 , Original ARDUINO Ethernet SHIELD 2 A000024 , ESP32 WROOM 32 D , ESP32 S3 DevKitC 1U-N8 Development Board , ESP32 WROOM 32E Development Kit , ESP32 CAM Development Board WiFi plus Bluetooth with OV2640 Camera Module , DS3231 , G950 01455 01 , B0506 , BO490 , NVIDIA Jetson Orin Nano Super Developer Kit , MPU 6050 3 Axis Accelerometer and Gyro Sensor , GY 271 HMC5883L 3 axis Electronic Compass Module Magnetic Field Sensor , SHT20 Sensor Module XY MD01 , Adafruit BH1750 Light Sensor STEMMA QT or Qwiic , Pycom FiPy Board , ARIES v3.0 Devlopment Board , ARIES IoT v2.0 Devlopment Board , XB24CDMSIT 001 , WRL 11812 , STM32F411RE , 37 in 1 Sensor Modules Kit , Quad Store 16in1 Sensor Modules Kit , MCP2515 Can Bus Shield Board , TJA1050 CAN Controller Bus Driver Interface Module , HF105 001 , DC Motor ROB 11696 , Micro HDMI Male to HDMI Female Adapter for Rpi 4 , High Speed Micro SD Card Reader , 50 CM USB to Micro USB Cable , 30 cm USB 2.0 A to USB 2.0 Mini B cable , 100 cm USB type C Cable compatible with Arduino , 30 cm USB A to B Cable for Arduino UNO and MEGA Boards , Pro range 5V 2.5A Power Adapter with Micro USB Plug compatible for ESP 32 board , Stepper Motor 28YBJ 48 with ULN2003 Driver Board , 4x3 Matrix 12 keys Membrane Switch Keypad , I2C or TWI or SPI Serial Interface Module , SG90 Mini Analog Servo motor , Soldering kit , Flux soldering Paste , Lead solder wire , Official Raspberry Pi 5 Camera FPC Cable 200mm , Waveshare 7inch Capacitive Touch Display for Raspberry Pi , Male to Male Jumper Wires 40Pcs 20cm , Male To Female Jumper Wires 40 Pcs 10cm , Female to Female Breadboard Jumper , 830 Points Solderless Prototype PCB Breadboard High Quality , STM32 nucleo on board programmer , Raspberry Pi Camera Module 3 , STM32F429I-DISC1 , Adafruit Feather M4 CAN Express with ATSAME51 , 4382 FEATHER STM32F405 EXPRESS , V2 link debugger , 4775 Metro ESP32 S2 Express , CJMCU 2551 MCP2551 CAN Protocol Controller High-speed Interface Module , 938 GRAPHIC DISPLAY OLED WHITE 1.3 , W25Q32 Large Capacity Flash Storage Module , ESP32 Camera Development Board WiFi plus Bluetooth Module with OV2640 Camera Module , NUCLEO WBA52CG , Reyax RYLR896 868 or 915MHz LoRa Antenna Transceiver ModuleDIP Version , CP2102 6pin USB 2.0 to TTL UART serial converter
June 11, 2025
July 2, 2025 at 6:00 PM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity, possessing essential legal and taxation documents, and demonstrating prior experience in supplying educational equipment relevant to IoT components. Bidders must also ensure their products adhere to the specified quality standards.

Qualified bidders must hold necessary certifications that demonstrate compliance with industry standards for electronic components and educational tools. Bidders may be required to submit quality assurance certificates related to the products proposed in their bids.

The registration process usually involves submitting relevant documents and credentials as specified in the tender documents. Participants must ensure their documents are in the accepted formats to facilitate a smooth registration and bidding experience.

Accepted document formats typically include PDF for reports and proposals, along with any additional specifications outlined in the tender documents. Participants must confirm adherence to the outlined submission guidelines to avoid discrepancies.

The evaluation and selection process will assess several factors including technical compliance, pricing structures, and past performance. Key elements are the quality of proposed solutions and alignment with educational needs as defined in the tender.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders