RING TO DRG NO. 303-41 (As per Drawings and Specifications)

RING TO DRG NO. 303-41(AS PER DRAWINGS AND SPECIFICATIONS)

Goods
Qty:67.3K

Tender Timeline

Tender Issue
June 20, 2025 at 9:48 AM

Tender Description

Tender Title: RING TO DRG NO. 303-41 (As per Drawings and Specifications)

Tender Reference Number: f9f6137

Issuing Authority/Department

The tender is issued by the Department of Defence Production, under the Ministry of Defence.

Scope of Work and Objectives

This tender aims to procure RING TO DRG NO. 303-41 as per detailed drawings and specifications provided throughout the tender documents. The total quantity required is 67,287 units, ensuring that specifications adhere strictly to military and defense standards. The objective of this procurement is to enhance the production capabilities while meeting precise requirements of the Department of Defence.

General Information

Item Category
RING TO DRG NO. 303-41(AS PER DRAWINGS AND SPECIFICATIONS)
Ministry Name
Ministry of Defence
Department Name
Department of Defence Production
Organisation Name
Armoured Vehicles Nigam Limited

Financial Information

Bid Offer Validity
90 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
2 Days

Tender Documents

4 Documents
GeM-Bidding-7989573.pdfMain Document
Other DocumentsOTHER
Buyer uploaded ATC documentATC ATC
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Similar Tenders

View All

Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) as per IS 6455

GEM
Goods
Qty:6
3 Files
Indian Army
GANGANAGAR, RAJASTHAN
Manu › Bear
Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) as per IS 6455 (Q3)
June 8, 2025
July 15, 2025 at 9:00 AM
View Details

GRID LINER -A as per DRG. NO- UCI-M-438-A,REV C FOR PRIMARY MILL .DISCH GRID LINER,GRID LINER -B as

₹1,33,411.00
GEM
Goods
Qty:537
6 Files
Uranium Corporation Of India Limited
Boq › Boql
GRID LINER -A as per DRG. NO- UCI-M-438-A,REV C FOR PRIMARY MILL .DISCH GRID LINER , GRID LINER -B as per DRG. NO- UCI-M-438-A,REV C FOR PRIMARY MILL .DISCH GRID LINER , GRID LINER -C as per DRG. NO- UCI-M-438- A,REV C FOR PRIMARY MILL .DISCH GRID LINER , GRID LINER A as per DRG. NO- UCI-M-896-A, REV E FOR SECONDARY MILL.DISCH GRID LINER , GRID LINER B as per DRG. NO- UCI-M-896-A, REV E FOR SECONDARY MILL.DISCH GRID LINER , GRID LINER C as per DRG. NO- UCI-M-896-A, REV E FOR SECONDARY MILL.DISCH GRID LINER , Liner Shell Type- A as per drawing no.- UCI -M-728-A, Rev -C, MN Steel Casting 9 feet X 16 feet Secondary Mill A type MOC and Dimension as per our drawing no..- UCI -M-728-A, Rev -C , Liner Shell Type- B as per drawing no.- UCI -M-728-A, Rev - C, MN Steel Casting 9 feet X 16 feet Secondary MillB type MOC and Dimension as per our drawing no..- UCI -M-728-A, Rev -C , DISCHARGE DEFLECTOR L.H IN TWO HALF as per DRG. NO UCI-M-459-A MATERIAL and DIMENSION as per drawing . , DISCHARGE DEFLECTOR R.H IN TWO HALF as per DRG. NO UCI-M-458-A MATERIAL and DIMENSION.as per drawing , LIFTER FOR PRIMARY and SECONDARY MILL 9 feet X 16 feet MATERIAL and DIMENSION AS PER OUR DRG.NO UCI-M-83-A , LINER DISCHARGE END , ITEM NO -A of DRG NO. UCI-M-373-A, REV B MATERIAL and DIMENSION as per drawing. , LINER DISCHARGE END , ITEM NO -B DRG NO.UCI- M-373-A, REV B MATERIAL and DIMENSION as per drawing , LINER DISCHARGE END , ITEM NO -C, DRG NO.UCI-M-373-A, REV B MATERIAL and DIMENSION as per drawing. , LINER DISCHARGE END , ITEM NO -D , DRG NO.UCI-M-373-A, REV B MATERIAL and DIMENSION as per drawing. , LINER DISCHARGE END , ITEM NO -E , DRG NO.UCI-M-373-A, REV B MATERIAL and DIMENSION as per drawing. , Outer Head Liner as per drg no.UCI-M-821-A, Item No.8 8 feet X12 feet Rod Mill, Material Dimension as per Drawing. , Inner Head Liner as per drg no.UCI-M-821-A, Item No.9 8 feet X 12 feet Rod Mill, Material Dimension as per Drawing , Mantle liner as per Drawing No. UCI-M-813-A,IS-276.Std Head Cone Crusher , Bowl liner as per Drawing No. UCI-M-782-A,IS- 276.Std Head Cone Crusher , Fixed Jaw Plate as per Drg. No. UCI-M-903-A, Rev A 24 inch x 36 inch OHE Jaw crusher , Moving Jaw Plate as per Drg. No. UCI-M-903-A, Rev A 24 inch x 36 inch OHE Jaw crusher , Feed end liner, Top liner as per drg no UCI-M-947-A,-Item no.2, Rev.A. , Feed end liner, Bottom Liner as per drg no UCI-M-947-A-Item no.1 ,Rev.A , Feed end Trunion Liner for primary old Mill as per our drg.No UCI-M-88-A, Rev A, MOC -chrome steel Feed sleeve , Feed Sleeve for 8 feet X 12 feet Rod mill as per drawing no. UCI- M-864-A, Rev B , Liner Inlet Trunion Feed Liner as per our drg.No UCI-M-89-A, Rev A, MOC -chrome steel Feed sleeve for Secondary old Mill , Liner Inlet Trunion Feed Liner as per our drg.No UCI-M-969-A, Rev A, MOC -chrome steel Feed sleeve for New ball Mill, 500 TPD , Liner outlet Trunion discharge Liner as per our drg.No UCI-M-972-A, Rev A, MOC -chrome steel Discharge sleeve for New ball Mill, 500 TPD , Liner outlet, Trunion discharge Liner as per our drg.No UCI- M-641-A, Rev A, MOC -chrome steel Discharge sleeve for old primary and secondary mill, 9 feet X16 feet , Liner Inlet Trunion Feed Liner as per our drg.No UCI-M-990-A, Rev A, MOC -chrome steel Feed sleeve for RM 2 ball Mill, 9-1-2 feet X15 feet , Liner outlet, Trunion discharge Liner our drg.No UCI-M-954-A, Rev A, MOC -chrome steel Discharge sleeve for RM 2 rod mill and RM 2 Ball mill,
June 19, 2025
July 14, 2025 at 1:00 PM
View Details

1. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A

₹1,02,280.00
GEM
Goods
Qty:140
5 Files
Nuclear Power Corporation Of India Limited
Boq › Boql
1. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O RING,EPR, Part No-2 , 2. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O ring, EPR Part No-4 , 3. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O RING,EPR, Part No-7 , 4. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, Mating ring,carbon Part No-8 , 5. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O Ring,EPR Part No-9 , 6. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O Ring EPR, Part No.12 , 7. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination, O Ring ,Part No-13 , 8. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, Set of spring, Hast C, Part No.3 , 9. EBIPL make mechanical seal for UGP vacuum pump- as per drawing no. A4R H240-B-R2 for airovac make vacuum pump model 2T30D and 2T50D , 10. spares for EBIPL make mechanical seal- Part no.1 of drawing A4R H240-B-R2, carbon face- RH assembly , 11. spares for EBIPL make mechanical seal- Part no.2 of drawing A4R H240-B-R2, mating ring ceramic , 12. spares for EBIPL make mechanical seal- Part no.3 of drawing A4R H240-B-R2, mating ring packing , 13. spares for EBIPL make mechanical seal- Set of elastomer and soft packing of drawing A4R H240-B-R2, 2 nos in 1 set , 14. EBIPL make mechanical seal- Type PO3 D52 as per attached drawing no. P510-P0112-R3 , 15. EBIPL make mechanical seal as per attached drawing no. P510- P0112-R3 - Seal Ring, Carbon, Part no. 1B , 16. EBIPL make mechanical seal as per attached drawing no. P510-P0112- R3 - Mating Ring, Tungsten Carbide, Part no. 2 , 17. EBIPL make mechanical seal as per attached drawing no. P510- P0112-R3- O Ring for Seal Ring, Part no. 1D MOC - Viton , 18. EBIPL make spare for above mechanical seal as per attached drawing no. P510-P0112-R3- O Ring for Mating Ring, Part no. 3 MOC - Viton , 19. EBIPL make mechanical seal type DR3 30 mm as per drawing no. R3A C402-A-R7
June 20, 2025
July 14, 2025 at 11:00 AM
View Details

Acceleration Measurement System as per specification No. HEMRL/INST/BLAST/2025/04

₹1,18,000.00
GEM
Goods
Qty:1
3 Files
Office Of Dg (ace)
Univ
Acceleration Measurement System as per specification No. HEMRL/INST/BLAST/2025/04
June 20, 2025
July 14, 2025 at 11:00 AM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity competent in delivering the required goods as specified in the tender documents. Bidders must have prior relevant experience and financial capability to ensure they meet the obligations stated in the contract.

Bidders need to produce valid legal documents, including but not limited to business registration certificates, licenses relevant to the industry, and any specific compliance certificates pertaining to quality and safety standards.

Bidders can register by following the instructions in the tender documentation, ensuring that all required documentation is prepared in the accepted formats, which typically include PDF or Word documents.

A performance security may be required upon award of the contract to ensure execution as per the tender terms. The specifics regarding the percentage and form of security will be outlined in the final tender documents.

The evaluation will entail a review of all submitted bids based on technical compliance, financial stability, and cost-effectiveness. The selected proposals will be notified as per the protocols outlined in the tender documentation, ensuring clarity throughout the selection process.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders