Forming of Plate to DRG. No. OFDC/SK-3474 with OFDC Material

Forming of Plate to DRG. No. OFDC/SK-3474 with OFDC Material

Goods
Qty:59.5K
EMD: ₹40,466

Tender Timeline

Tender Issue
June 21, 2025 at 12:21 PM

Tender Description

Tender Title: Forming of Plate to DRG. No. OFDC/SK-3474 with OFDC Material
Reference Number: fc284e35
Issuing Authority/Department: Department of Defence Production, Ministry of Defence

The objective of this tender is to procure a total quantity of 59,454 units of plates as per the detailed drawing OFDC/SK-3474. The plates must be fabricated using the specified OFDC material that adheres strictly to the technical specifications outlined by the issuing authority.

Scope of Work and Objectives

The successful bidder will be responsible for the complete forming of plates as per the drawing specifications. The work involves the cutting, shaping, and finishing of materials in compliance with safety standards and regulatory requirements laid down by the Ministry of Defence. The completion of this project is critical to meet the operational needs of the Defence sectors.

General Information

Item Category
Forming of Plate to DRG. No. OFDC/SK-3474 with OFDC Material
Ministry Name
Ministry of Defence
Department Name
Department of Defence Production
Organisation Name
Yantra India Limited

Financial Information

EMD Amount
₹40,466.00
Bid Offer Validity
90 (Days)
Past Performance
50 %
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
2 Days

Tender Documents

6 Documents
GeM-Bidding-7994969.pdfMain Document
Other DocumentsOTHER
Other DocumentsOTHER DRAWING
Other DocumentsOTHER
Buyer uploaded ATC documentATC ATC
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Experience Criteria
  • Past Performance
  • Bidder Turnover
  • Certificate (Requested in ATC)
  • Additional Doc 1 (Requested in ATC)
  • Additional Doc 2 (Requested in ATC)
  • Additional Doc 3 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

GRID LINER -A as per DRG. NO- UCI-M-438-A,REV C FOR PRIMARY MILL .DISCH GRID LINER,GRID LINER -B as

₹1,33,411.00
GEM
Goods
Qty:537
6 Files
Uranium Corporation Of India Limited
Boq › Boql
GRID LINER -A as per DRG. NO- UCI-M-438-A,REV C FOR PRIMARY MILL .DISCH GRID LINER , GRID LINER -B as per DRG. NO- UCI-M-438-A,REV C FOR PRIMARY MILL .DISCH GRID LINER , GRID LINER -C as per DRG. NO- UCI-M-438- A,REV C FOR PRIMARY MILL .DISCH GRID LINER , GRID LINER A as per DRG. NO- UCI-M-896-A, REV E FOR SECONDARY MILL.DISCH GRID LINER , GRID LINER B as per DRG. NO- UCI-M-896-A, REV E FOR SECONDARY MILL.DISCH GRID LINER , GRID LINER C as per DRG. NO- UCI-M-896-A, REV E FOR SECONDARY MILL.DISCH GRID LINER , Liner Shell Type- A as per drawing no.- UCI -M-728-A, Rev -C, MN Steel Casting 9 feet X 16 feet Secondary Mill A type MOC and Dimension as per our drawing no..- UCI -M-728-A, Rev -C , Liner Shell Type- B as per drawing no.- UCI -M-728-A, Rev - C, MN Steel Casting 9 feet X 16 feet Secondary MillB type MOC and Dimension as per our drawing no..- UCI -M-728-A, Rev -C , DISCHARGE DEFLECTOR L.H IN TWO HALF as per DRG. NO UCI-M-459-A MATERIAL and DIMENSION as per drawing . , DISCHARGE DEFLECTOR R.H IN TWO HALF as per DRG. NO UCI-M-458-A MATERIAL and DIMENSION.as per drawing , LIFTER FOR PRIMARY and SECONDARY MILL 9 feet X 16 feet MATERIAL and DIMENSION AS PER OUR DRG.NO UCI-M-83-A , LINER DISCHARGE END , ITEM NO -A of DRG NO. UCI-M-373-A, REV B MATERIAL and DIMENSION as per drawing. , LINER DISCHARGE END , ITEM NO -B DRG NO.UCI- M-373-A, REV B MATERIAL and DIMENSION as per drawing , LINER DISCHARGE END , ITEM NO -C, DRG NO.UCI-M-373-A, REV B MATERIAL and DIMENSION as per drawing. , LINER DISCHARGE END , ITEM NO -D , DRG NO.UCI-M-373-A, REV B MATERIAL and DIMENSION as per drawing. , LINER DISCHARGE END , ITEM NO -E , DRG NO.UCI-M-373-A, REV B MATERIAL and DIMENSION as per drawing. , Outer Head Liner as per drg no.UCI-M-821-A, Item No.8 8 feet X12 feet Rod Mill, Material Dimension as per Drawing. , Inner Head Liner as per drg no.UCI-M-821-A, Item No.9 8 feet X 12 feet Rod Mill, Material Dimension as per Drawing , Mantle liner as per Drawing No. UCI-M-813-A,IS-276.Std Head Cone Crusher , Bowl liner as per Drawing No. UCI-M-782-A,IS- 276.Std Head Cone Crusher , Fixed Jaw Plate as per Drg. No. UCI-M-903-A, Rev A 24 inch x 36 inch OHE Jaw crusher , Moving Jaw Plate as per Drg. No. UCI-M-903-A, Rev A 24 inch x 36 inch OHE Jaw crusher , Feed end liner, Top liner as per drg no UCI-M-947-A,-Item no.2, Rev.A. , Feed end liner, Bottom Liner as per drg no UCI-M-947-A-Item no.1 ,Rev.A , Feed end Trunion Liner for primary old Mill as per our drg.No UCI-M-88-A, Rev A, MOC -chrome steel Feed sleeve , Feed Sleeve for 8 feet X 12 feet Rod mill as per drawing no. UCI- M-864-A, Rev B , Liner Inlet Trunion Feed Liner as per our drg.No UCI-M-89-A, Rev A, MOC -chrome steel Feed sleeve for Secondary old Mill , Liner Inlet Trunion Feed Liner as per our drg.No UCI-M-969-A, Rev A, MOC -chrome steel Feed sleeve for New ball Mill, 500 TPD , Liner outlet Trunion discharge Liner as per our drg.No UCI-M-972-A, Rev A, MOC -chrome steel Discharge sleeve for New ball Mill, 500 TPD , Liner outlet, Trunion discharge Liner as per our drg.No UCI- M-641-A, Rev A, MOC -chrome steel Discharge sleeve for old primary and secondary mill, 9 feet X16 feet , Liner Inlet Trunion Feed Liner as per our drg.No UCI-M-990-A, Rev A, MOC -chrome steel Feed sleeve for RM 2 ball Mill, 9-1-2 feet X15 feet , Liner outlet, Trunion discharge Liner our drg.No UCI-M-954-A, Rev A, MOC -chrome steel Discharge sleeve for RM 2 rod mill and RM 2 Ball mill,
June 19, 2025
July 14, 2025 at 1:00 PM
View Details

1. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A

₹1,02,280.00
GEM
Goods
Qty:140
5 Files
Nuclear Power Corporation Of India Limited
Boq › Boql
1. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O RING,EPR, Part No-2 , 2. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O ring, EPR Part No-4 , 3. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O RING,EPR, Part No-7 , 4. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, Mating ring,carbon Part No-8 , 5. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O Ring,EPR Part No-9 , 6. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, O Ring EPR, Part No.12 , 7. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination, O Ring ,Part No-13 , 8. EBIPL make mechanical seal type HPV 385 with carbon Vs Sic Face combination as per Drg. No. A2A F550-A-03-R7, Set of spring, Hast C, Part No.3 , 9. EBIPL make mechanical seal for UGP vacuum pump- as per drawing no. A4R H240-B-R2 for airovac make vacuum pump model 2T30D and 2T50D , 10. spares for EBIPL make mechanical seal- Part no.1 of drawing A4R H240-B-R2, carbon face- RH assembly , 11. spares for EBIPL make mechanical seal- Part no.2 of drawing A4R H240-B-R2, mating ring ceramic , 12. spares for EBIPL make mechanical seal- Part no.3 of drawing A4R H240-B-R2, mating ring packing , 13. spares for EBIPL make mechanical seal- Set of elastomer and soft packing of drawing A4R H240-B-R2, 2 nos in 1 set , 14. EBIPL make mechanical seal- Type PO3 D52 as per attached drawing no. P510-P0112-R3 , 15. EBIPL make mechanical seal as per attached drawing no. P510- P0112-R3 - Seal Ring, Carbon, Part no. 1B , 16. EBIPL make mechanical seal as per attached drawing no. P510-P0112- R3 - Mating Ring, Tungsten Carbide, Part no. 2 , 17. EBIPL make mechanical seal as per attached drawing no. P510- P0112-R3- O Ring for Seal Ring, Part no. 1D MOC - Viton , 18. EBIPL make spare for above mechanical seal as per attached drawing no. P510-P0112-R3- O Ring for Mating Ring, Part no. 3 MOC - Viton , 19. EBIPL make mechanical seal type DR3 30 mm as per drawing no. R3A C402-A-R7
June 20, 2025
July 14, 2025 at 11:00 AM
View Details

Spares for HR TEM - Prevacuum Pump. Material No. : FEI-1057942.,Spares for HR TEM - Linear Pirani A

GEM
Goods
Qty:2
5 Files
Council Of Scientific And Industrial Research (csir)
Univ
Spares for HR TEM - Prevacuum Pump. Material No. : FEI- 1057942. , Spares for HR TEM - Linear Pirani Apg100-Xm. Material No. : FEI-1051143
June 20, 2025
July 14, 2025 at 9:00 AM
View Details

CONTROL SYSTEM TO DRG NO 675-42-CD7 W/O ARTICLE 9P135M1 USE LCSO APPROVED COMPONENT.

GEM
Goods
Qty:12
11 Files
Armoured Vehicles Nigam Limited
Univ
CONTROL SYSTEM TO DRG NO 675-42-CD7 W/O ARTICLE 9P135M1 USE LCSO APPROVED COMPONENT.
June 21, 2025
July 12, 2025 at 6:00 PM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity, having experience in similar projects, and demonstrating financial stability through recent statements. Bidders must also comply with all regulatory requirements outlined by the Department of Defence Production.

The tender demands adherence to strict technical specifications, including dimensions and quality standards as specified in drawing OFDC/SK-3474. All materials used must meet the guidelines established by the issuing authority to ensure operational effectiveness.

Bidders should prepare to comply with the payment terms that may include milestone payments based on project progress and final settlement upon successful delivery and approval of the finished products. Detailed terms will be evaluated and communicated post-selection.

Documents can be submitted as per the guidelines in the tender specifications. Typically, this will include electronic submission of both the technical proposal and financial proposal in the formats outlined within the tender documentation.

The tender includes specific provisions for Micro, Small, and Medium Enterprises (MSEs), allowing eligibility for the benefits aimed at promoting participation from smaller businesses. These benefits can include financial assistance or relaxed eligibility criteria, enhancing competitive opportunities for MSEs.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders