ATG ITEMS - Department of Military Affairs - Indian Army

Diameter Fast Fold Landing Pad for RC Plane,Magnetic Heat Insulation Workbench Mat,Soldering Iron,S

Jammu, Jammu & kashmir
Goods
Qty:23

Tender Timeline

Tender Issue
June 9, 2025 at 8:03 PM

Tender Title: ATG ITEMS

Reference Number: 15afc56ed

Issuing Authority: Department of Military Affairs, Ministry of Defence

The ATG ITEMS tender represents an opportunity with the Department of Military Affairs under the Ministry of Defence, focused on procuring various essential tools and materials designed primarily for Remote Control (RC) planes and related applications. This document outlines the comprehensive scope of work, eligibility criteria, technical specifications, and financial requirements for potential bidders.

Scope of Work and Objectives

The primary objective of this tender is to supply a diverse range of products categorized under Diameter Fast Fold Landing Pad for RC Plane, Magnetic Heat Insulation Workbench Mat, Soldering Tools, and various Calibration Hubs. Bidders are expected to ensure high-quality standards in the products supplied, adhering to the detailed specifications listed in the document. The items covered in this tender include, but are not limited to:

  • Diameter Fast Fold Landing Pad for RC Plane
  • Magnetic Heat Insulation Workbench Mat
  • Soldering Iron and Solder Wire
  • 8 in 1 Throttle Calibration Hub
  • Various tools including Taparia Wire Cutter, Plier, Screw Driver Set, and others

These products are crucial for military services equipped with RC technology.

Eligibility Criteria

To participate in this tender process, suppliers must meet specific eligibility criteria as set forth by the issuing authority. Required qualifications include being a registered entity compliant with relevant industry standards and holding any necessary licenses for the products being offered. Vendors should also demonstrate prior experience in supplying similar items to government agencies.

Technical Requirements

All bidders must adhere to established technical requirements, ensuring all items supplied meet industry standards for safety, durability, and performance. Each product must be clearly defined in terms of dimensions, materials used, and operational guarantees. Compliance with national quality standards will be a key evaluation criterion.

Financial Requirements

The proposal must include a detailed breakdown of pricing, aligning with the expected delivery quantities specified in the tender. Financial stability and a proven track record of past contracts will be considered during the evaluation process.

Document Submission Details

Interested bidders are required to submit their documentation as outlined in the tender notice. It is essential to provide all necessary certificates and compliance documents along with the bid submission. Bids may be submitted electronically through the designated platform as per established guidelines.

Special Provisions

The tender includes provisions that support Micro, Small, and Medium Enterprises (MSEs) and startups as well as eligibility under the 'Make in India' initiative. These measures are aimed at promoting local manufacturers and ensuring that the procurement process encourages participation from smaller entities.

Evaluation Process

The evaluation process will include a thorough review of submitted bids based on adherence to the technical and financial requirements. Bids will be scored based on quality, price, and compliance with the evaluation criteria laid out in the tender documents. Successful bidders will be notified accordingly.

Delivery Locations

All supplies under this tender are to be delivered to designated military units and locations as specified by the Department of Military Affairs. Delivery timelines will be strictly monitored to ensure timely receipt and integration of products.

Contact Information

For further queries related to this tender, interested parties are encouraged to reach out to the official contact points provided through the procurement platform. All inquiries must be submitted in the manner specified to ensure a prompt response.

This ATG ITEMS tender seeks to enhance the operational capabilities of military applications and expects high-quality deliverables that meet stringent requirements set forth by the Department of Military Affairs.

Tender BOQ Items

18 Items
1.

Diameter Fast Fold Landing Pad for RC Plane

Qty:1
Unit:pieces
30
2.

Magnetic Heat Insulation Workbench Mat

Qty:1
Unit:pieces
30
3.

Soldering Iron

Qty:1
Unit:pieces
30
4.

Solder Wire

Qty:2
Unit:pieces
30
5.

8 in 1 Throttle Calibration Hub

Qty:1
Unit:pieces
30
6.

Taparia Wire Cutter Stripper 150mm

Qty:1
Unit:pieces
30
7.

Hexagonal Mini Cross Wrench Sleeve Nut Tool

Qty:1
Unit:pieces
30
8.

Taparia Spanner Wrench

Qty:2
Unit:pieces
30
9.

Taparia Plier

Qty:2
Unit:pieces
30
10.

Taparia Screw Driver Set 802

Qty:1
Unit:set
30
11.

Taparia Hex Wrench Set KM9V

Qty:1
Unit:set
30
12.

Taparia Nose Plier

Qty:1
Unit:pieces
30
13.

Self Locking Adjustable Nylon Cable Tiee

Qty:2
Unit:packet
30
14.

Soldering Gun Stand

Qty:1
Unit:pieces
30
15.

EGO Wire Stripper Cutter

EGO Wire Stripper & Cutter

Qty:1
Unit:pieces
30
16.

Ball Head Hex Key Screwdriver

Qty:2
Unit:pieces
30
17.

Lipo Battery Voltage tester low Voltage Alarm Buzzer for Drone

Qty:1
Unit:pieces
30
18.

Vifly Short Saver 2 Smart Smoke Stopper

Qty:1
Unit:pieces
30

General Information

Item Category
Diameter Fast Fold Landing Pad for RC Plane , Magnetic Heat Insulation Workbench Mat , Soldering Iron , Solder Wire , 8 in 1 Throttle Calibration Hub , Taparia Wire Cutter Stripper 150mm , Hexagonal Mini Cross Wrench Sleeve Nut Tool , Taparia Spanner Wrench , Taparia Plier , Taparia Screw Driver Set 802 , Taparia Hex Wrench Set KM9V , Taparia Nose Plier , Self Locking Adjustable Nylon Cable Tiee , Soldering Gun Stand , EGO Wire Stripper Cutter , Ball Head Hex Key Screwdriver , Lipo Battery Voltage tester low Voltage Alarm Buzzer for Drone , Vifly Short Saver 2 Smart Smoke Stopper
Ministry Name
Ministry of Defence
Department Name
Department of Military Affairs
Organisation Name
Indian Army
State
Jammu & kashmir
City
Jammu

Financial Information

Bid Offer Validity
30 (Days)

Evaluation and Technical Information

Inspection Required
No

Tender Documents

4 Documents
GeM-Bidding-7943401.pdfMain Document
BOQ DocumentBOQ BOQ
BOQ DocumentBOQ BOQ
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Similar Tenders

View All

Electrician screwdriver thin stem insulated handle,Electrician screwdriver thin stem insulated hand

GEM
Goods
Qty:299
4 Files
N/a
NAINITAL, UTTARAKHAND
Boq › Boql
Electrician screwdriver thin stem insulated handle , Neon Tester , Bradawl , Brake Test arrangement with two spring balance rating , Bus bar with brackets , Contactor , auxiliary contacts , Crimping Tool , Copper bit soldering iron , De soldering Gun , Electrician Helmet , Gauge wire imperial stainless steel marked in SWG mm , Hydrometer , Insulated Screw driver , Knife Switch DPDT fitted with fuse terminals , Knife Switch TPDT fitted with fuse terminals , Laboratory Type Induction Coil , Limit Switch , Load Bank Lamp heater Type , Magneto spanner , MCCB , Pin Type insulators including hardware fitting , Shackle type insulators including hardware fitting , egg type insulators including hardware fitting , Spension type insulators including hardware fitting , Pincer , Pipe vice Cast Iron with hardened jaw open type , Plane cutters , Pliers flat nose insulated , Pliers long nose insulated , Pliers round nose insulated , Portable Electric Drill Machine , Relay Cut out Relays , Relay Reverse current , Relay Over current , Relay Under voltage , Rheostat Sliding type , Rotary Switch , Scissors blade SS , Wire Cutter and Stripper , Brass parallel rulers in a case , Hand held GPS , Ohm Meter Portable box type , Ohm Meter Series Type and Shunt Type , Digital Multi Meter , AC Voltmeter M I analog portable box type housed in Bakelite case , Milli Voltmeter centre zero analog portable box type housed in Bakelite case , Ammeter MC analog, portable box type housed in Bakelite case , Ammeter MC analog portable box type housed in Bakelite case , AC Ammeter MI analog portable box type housed in Bakelite case , Kilo Wattmeter Analog , Digital Wattmeter , A C Energy Meter , AC Energy Meter , Power Factor Meter Digital , Frequency Meter , Magnetic Flux Meter , Lux meter , Tachometer , Tong Tester Clamp Meter , Megger , Wheat Stone Bridge , Single Phase Variable Auto , Single Phase Variable AutoTransformer , Phase Sequence Indicator , Growler , AC Starters Resistance type starter , AC Starters Direct online Starter , AC StartersStar Delta Starter Manual , AC StartersStar Delta Starter Semi automatic , AC Starters Star Delta Starter Fully automatic , AC Starters Star Delta Starter Soft starter , AC StartersAuto Transformer type , AC Starters Soldering Iron , Temperature controlled Soldering Iron , Voltage Stabilizer , DC Power Supply , Battery Charger , Current Transformer , Potential Transformer , Motor Generator DC to AC set , AC Squirrel Cage Motor with star delta starter and triple pole iron clad switch fuse with Mechanical Load , AC phase wound slip ring Motor with starter switch , Universal Motor with starter switch , Single phase Transformer core type air cooled , Three phase transform shell type oil cooled with Delta Star , Electrical Machine Trainer ke arrangement dynamo meter instrument panel and power supply unit , Diesel Generator Set with changeover switch over current breaker and water or air cooled with armature star-delta connections AC 3 phase , Pillar Electric Drill Machine Motorized , Motorized Bench Grinder , AC Series type Motor , Single Phase Capacitor Motor with starter switch , Try Square , Pliers flat nose , Pliers round nose , Plier long nose , Multi meter Analog
June 7, 2025
June 28, 2025 at 5:00 PM
View Details

Bronze flex Powder,Steel rod,Nitrogen Gas fill up,Soldering Wire,Soldering Flex,Cutting Wheel 4,Woo

GEM
Goods
Qty:226
4 Files
Indian Army
LEH, JAMMU & KASHMIR
Boq › Boql
Bronze flex Powder , Steel rod , Nitrogen Gas fill up , Soldering Wire , Soldering Flex , Cutting Wheel 4 , Wood Cutter Blade , Cutting disc for hand cutter , DC Screw Dvr Set , Insulation Tape Big Size , Dry Soldering Wire , Wire Stripper , SD Matting , Nose plier Inner Outer , Pipe Wrench 300 mm , Drill Bit , Drift Pin Steel Set 1mm to 10mm , Battery Clamp , Bronze Flex Powder for gas Welding , Screw Dvr set 16 Pcs , Ballistic Goggle for Technicians , Drill Bit set , Drill Machine , Feviqwik , Thread Tape
May 24, 2025
June 14, 2025 at 8:00 PM
View Details

Stanley double side Open End 6 to 32 nos,Stanley One side Open One Side Ring Wrench 06 to 32 nos,Sc

GEM
Goods
Qty:146
4 Files
Indian Army
POONCH, JAMMU & KASHMIR
Boq › Boql
Stanley double side Open End 6 to 32 nos , Stanley One side Open One Side Ring Wrench 06 to 32 nos , Screw Driver Double Side Combination Small , Screw Driver Double Side Combination Medium , Screw Driver Double Side Combination Large , Taparia Allen Key Set Large , Pipe Wrench Medium , Taparia Bevel Chisel Set , Hand Gloves for Workshop and Craftsman , Nose Plier Circlip Plier All Types , 15 Blades filler Gauge Dual Marked Metric Measurement , Cutting Plier All Type Stanley , Wire Cutter , Impact Screw Driver , Mechanical Creeper , Flexible Magnet Stick , Head Torch , Filter Clamp Small Best Quality , Filter Clamp Med Best Quality , Filter Clamp Large Best Quality , Oil Tray , Portable Cordless Screwdriver Kit Bosch Heavy duty , Pneumatic Impact Wrench Bosch Heavy Duty , Hammer Top Quality 2 kg , Mini Precision Screw Dvr , Tripod Iron Stand Lt Veh , Big Size Socket Set with Handle , Spanner Ring 34 to 36 , Hub Spanner MG , Hub Spanner two point five Ton , Hub Spanner ALS , Drift Brass Parallel , Screw Driver Small Hvy Duty , Screw Driver Med Hvy Duty , Screw Driver Large Hvy Duty , Stanley screw driver set 101 Pce , Professional Hardware tools Computer Bosch Electric , Nose Plier , Twiser , Cutting Plier Taparia , Digital Multimeter , Soldering Flux , De-soldering Pump , De-soldering Wick , Soldering Wire , Ethyl Alchol , Lens Cleaning Cloth , Glue Gun Stick , Glue Gun , Elect Tester Screw Dvr , DC Testing Lamp
May 23, 2025
June 13, 2025 at 12:00 PM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity, compliant with industry regulations, and possessing relevant licenses for the products offered. Vendors must provide proof of experience in delivering similar items to government bodies. Additionally, documentation validating adherence to quality standards is required for evaluation.

Bidders need to provide various required certificates, including quality assurance certifications, business registration documents, and compliance certificates relevant to the products being supplied. All submitted documents should be current and reflect the standards outlined in the tender specifications to ensure eligibility.

The registration process involves creating an account on the designated procurement platform where the tender is hosted. Bidders must complete the required fields with accurate information and undergo any necessary verification procedures. Detailed instructions can be found within the tender documentation.

Accepted document formats include standard PDF files for reports, images, and supporting evidence. Bidders should ensure that all documents are legible, properly labeled, and adhere to any specified size limitations as mentioned in the tender guidelines.

Participants must comply with performance security requirements involving a monetary deposit or bank guarantee as stipulated in the tender documents. This is typically aimed at ensuring fulfillment of contractual obligations and the delivery of products meeting defined standards. Further details regarding the deposit amount and conditions can be found in the tender specifications.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders