Small Hydro Technician Tools and Equipment - Electricals

Electrician screwdriver thin stem insulated handle,Electrician screwdriver thin stem insulated hand

Goods
Qty:299
EST Bid: ₹9.0 Lakh

Tender Timeline

Tender Issue
June 7, 2025 at 4:52 PM

Tender Title: Small Hydro Technician Tools and Equipment - Electricals

Reference Number: 172e20bc

Issuing Authority: Directorate General of Training, Ministry of Skill Development and Entrepreneurship

The intent of this tender is to procure essential tools and equipment used in small hydro technical applications related to electrical operations. The scope of work encompasses the supply of various tools instrumental for ensuring safe and efficient functioning in small hydro installations. This includes, but is not limited to, electrician screwdriver thin stem insulated handles, neon testers, and copper bit soldering irons, among others.

Objectives

The primary objective is to enhance the practical capabilities of technicians and trainees involved in small hydro projects, ensuring they have access to quality equipment that meets industry standards.

Eligibility Criteria

To qualify for this tender, bidders must demonstrate that they are registered entities capable of supplying the required tools and equipment as specified. There are specific eligibility criteria that each participant must meet, including valid registration with relevant authorities and adherence to national regulations for procurement.

Technical Requirements

The technical specifications for the tools requested include quality standards that align with industry benchmarks. Each item must be functional, reliable, and appropriate for advanced hydroelectric systems. Bidders must also provide certificates or documentation proving the quality and compliance of the products being offered.

Financial Requirements

Bidders will need to provide comprehensive financial documents ensuring their capability to deliver the goods upon winning the contract. This includes details of their financial health, evidence of past successful contracts of similar nature, and an understanding of payment terms linked to performance security.

Document Submission Details

Interested parties are required to submit their bids electronically via the designated portal. All submissions must include a completed bid document following the required format. It is critical to adhere to the defined structure, ensuring all necessary information and documentation are included to avoid disqualification.

Special Provisions

Micro, Small, and Medium Enterprises (MSEs) are encouraged to apply under this tender, benefiting from provisions aimed at promoting participation in the government procurement process. Startups can also leverage specific benefits designed to provide equal opportunities in competitiveness.

Evaluation Process

Submitted bids will undergo a thorough evaluation process whereby each one is assessed based on criteria such as price, technical merit, compliance with specifications, and past performance. A point-based system may apply, ensuring transparent selection.

Delivery Locations

The tools and equipment will be required to be delivered to specified training centers as identified by the Directorate General of Training. Details related to the exact delivery locations will be provided upon issuance of the contract.

Contact Information

For queries and clarifications, bidders are encouraged to reach out through the official channels provided in the tender documentation.

By procuring these essential tools and equipment, the Ministry aims to significantly boost the practical skillset of technicians in the renewable energy sphere, thereby supporting India's growth in small hydro projects.

Tender BOQ Items

112 Items
1.

Electrician screwdriver thin stem insulated handle

As per the Specifiction

Qty:21
Unit:nos
21
2.

Electrician screwdriver thin stem insulated handle

As per the Specifiction

Qty:21
Unit:nos
21
3.

Neon Tester

As per the Specifiction

Qty:21
Unit:nos
21
4.

Bradawl

As per the Specifiction

Qty:2
Unit:nos
21
5.

Brake Test arrangement with two spring balance rating

As per the Specifiction

Qty:1
Unit:no
21
6.

Bus bar with brackets

As per the Specifiction

Qty:3
Unit:nos
21
7.

Contactor

As per the Specifiction

Qty:2
Unit:nos
21
8.

auxiliary contacts

As per the Specifiction

Qty:2
Unit:nos
21
9.

Crimping Tool

As per the Specifiction

Qty:2
Unit:nos
21
10.

Crimping Tool

As per the Specifiction

Qty:2
Unit:nos
21
11.

Copper bit soldering iron

As per the Specifiction

Qty:2
Unit:nos
21
12.

De soldering Gun

As per the Specifiction

Qty:4
Unit:nos
21
13.

Electrician Helmet

As per the Specifiction

Qty:2
Unit:nos
21
14.

Gauge wire imperial stainless steel marked in SWG mm

As per the Specifiction

Qty:4
Unit:nos
21
15.

Hydrometer

As per the Specifiction

Qty:4
Unit:nos
21
16.

Insulated Screw driver

As per the Specifiction

Qty:3
Unit:nos
21
17.

Insulated Screw driver

As per the Specifiction

Qty:4
Unit:nos
21
18.

Knife Switch DPDT fitted with fuse terminals

As per the Specifiction

Qty:4
Unit:nos
21
19.

Knife Switch TPDT fitted with fuse terminals

As per the Specifiction

Qty:4
Unit:nos
21
20.

Laboratory Type Induction Coil

As per the Specifiction

Qty:2
Unit:nos
21
21.

Limit Switch

As per the Specifiction

Qty:2
Unit:nos
21
22.

Load Bank Lamp heater Type

As per the Specifiction

Qty:1
Unit:no
21
23.

Magneto spanner

As per the Specifiction

Qty:1
Unit:set
21
24.

MCCB

As per the Specifiction

Qty:1
Unit:no
21
25.

Pin Type insulators including hardware fitting

As per the Specifiction

Qty:2
Unit:nos
21
26.

Shackle type insulators including hardware fitting

As per the Specifiction

Qty:2
Unit:nos
21
27.

egg type insulators including hardware fitting

As per the Specifiction

Qty:2
Unit:nos
21
28.

Spension type insulators including hardware fitting

As per the Specifiction

Qty:2
Unit:nos
21
29.

Pincer

As per the Specifiction

Qty:4
Unit:nos
21
30.

Pipe vice Cast Iron with hardened jaw open type

As per the Specifiction

Qty:2
Unit:nos
21
31.

Plane cutters

As per the Specifiction

Qty:2
Unit:nos
21
32.

Pliers flat nose insulated

As per the Specifiction

Qty:4
Unit:nos
21
33.

Pliers long nose insulated

As per the Specifiction

Qty:4
Unit:nos
21
34.

Pliers round nose insulated

As per the Specifiction

Qty:4
Unit:nos
21
35.

Portable Electric Drill Machine

As per the Specifiction

Qty:1
Unit:no
21
36.

Relay Cut out Relays

As per the Specifiction

Qty:2
Unit:nos
21
37.

Relay Reverse current

As per the Specifiction

Qty:2
Unit:nos
21
38.

Relay Over current

As per the Specifiction

Qty:2
Unit:nos
21
39.

Relay Under voltage

As per the Specifiction

Qty:2
Unit:nos
21
40.

Relay Under voltage

As per the Specifiction

Qty:2
Unit:nos
21
41.

Rheostat Sliding type

As per the Specifiction

Qty:1
Unit:no
21
42.

Rheostat Sliding type

As per the Specifiction

Qty:1
Unit:no
21
43.

Rheostat Sliding type

As per the Specifiction

Qty:1
Unit:no
21
44.

Rheostat Sliding type

As per the Specifiction

Qty:1
Unit:no
21
45.

Rotary Switch

As per the Specifiction

Qty:2
Unit:nos
21
46.

Scissors blade SS

As per the Specifiction

Qty:4
Unit:nos
21
47.

Scissors blade SS

As per the Specifiction

Qty:4
Unit:nos
21
48.

Wire Cutter and Stripper

As per the Specifiction

Qty:4
Unit:nos
21
49.

Brass parallel rulers in a case

As per the Specifiction

Qty:4
Unit:nos
21
50.

Hand held GPS

As per the Specifiction

Qty:2
Unit:nos
21
51.

Ohm Meter Portable box type

As per the Specifiction

Qty:2
Unit:nos
21
52.

Ohm Meter Series Type and Shunt Type

As per the Specifiction

Qty:2
Unit:nos
21
53.

Digital Multi Meter

As per the Specifiction

Qty:12
Unit:nos
21
54.

AC Voltmeter M I analog portable box type housed in Bakelite case

As per the Specifiction

Qty:3
Unit:nos
21
55.

Milli Voltmeter centre zero analog portable box type housed in Bakelite case

As per the Specifiction

Qty:2
Unit:nos
21
56.

Ammeter MC analog, portable box type housed in Bakelite case

As per the Specifiction

Qty:2
Unit:nos
21
57.

Ammeter MC analog portable box type housed in Bakelite case

As per the Specifiction

Qty:2
Unit:nos
21
58.

Ammeter MC analog portable box type housed in Bakelite case

As per the Specifiction

Qty:2
Unit:nos
21
59.

AC Ammeter MI analog portable box type housed in Bakelite case

As per the Specifiction

Qty:2
Unit:nos
21
60.

AC Ammeter MI analog portable box type housed in Bakelite case

As per the Specifiction

Qty:2
Unit:nos
21
61.

AC Ammeter MI analog portable box type housed in Bakelite case

As per the Specifiction

Qty:2
Unit:nos
21
62.

Kilo Wattmeter Analog

As per the Specifiction

Qty:2
Unit:nos
21
63.

Digital Wattmeter

As per the Specifiction

Qty:2
Unit:nos
21
64.

A C Energy Meter

As per the Specifiction

Qty:2
Unit:nos
21
65.

AC Energy Meter

As per the Specifiction

Qty:2
Unit:nos
21
66.

Power Factor Meter Digital

As per the Specifiction

Qty:2
Unit:nos
21
67.

Frequency Meter

As per the Specifiction

Qty:2
Unit:nos
21
68.

Magnetic Flux Meter

As per the Specifiction

Qty:2
Unit:nos
21
69.

Lux meter

As per the Specifiction

Qty:2
Unit:nos
21
70.

Tachometer

As per the Specifiction

Qty:1
Unit:no
21
71.

Tachometer

As per the Specifiction

Qty:1
Unit:no
21
72.

Tong Tester Clamp Meter

As per the Specifiction

Qty:2
Unit:nos
21
73.

Megger

As per the Specifiction

Qty:2
Unit:nos
21
74.

Wheat Stone Bridge

As per the Specifiction

Qty:2
Unit:nos
21
75.

Single Phase Variable Auto

As per the Specifiction

Qty:2
Unit:nos
21
76.

Single Phase Variable AutoTransformer

As per the Specifiction

Qty:2
Unit:nos
21
77.

Phase Sequence Indicator

As per the Specifiction

Qty:2
Unit:nos
21
78.

Growler

As per the Specifiction

Qty:1
Unit:no
21
79.

AC Starters Resistance type starter

As per the Specifiction

Qty:1
Unit:no
21
80.

AC Starters Direct online Starter

As per the Specifiction

Qty:1
Unit:no
21
81.

AC StartersStar Delta Starter Manual

As per the Specifiction

Qty:1
Unit:no
21
82.

AC StartersStar Delta Starter Semi automatic

As per the Specifiction

Qty:1
Unit:no
21
83.

AC Starters Star Delta Starter Fully automatic

As per the Specifiction

Qty:1
Unit:no
21
84.

AC Starters Star Delta Starter Soft starter

As per the Specifiction

Qty:1
Unit:no
21
85.

AC StartersAuto Transformer type

As per the Specifiction

Qty:1
Unit:no
21
86.

AC Starters Soldering Iron

As per the Specifiction

Qty:2
Unit:no
21
87.

AC Starters Soldering Iron

As per the Specifiction

Qty:2
Unit:nos
21
88.

AC Starters Soldering Iron

As per the Specifiction

Qty:2
Unit:nos
21
89.

AC Starters Soldering Iron

As per the Specifiction

Qty:2
Unit:nos
21
90.

Temperature controlled Soldering Iron

As per the Specifiction

Qty:2
Unit:nos
21
91.

Voltage Stabilizer

As per the Specifiction

Qty:1
Unit:nos
21
93.

DC Power Supply

As per the Specifiction

Qty:2
Unit:no
21
94.

Battery Charger

As per the Specifiction

Qty:1
Unit:nos
21
95.

Current Transformer

As per the Specifiction

Qty:2
Unit:no
21
96.

Potential Transformer

As per the Specifiction

Qty:2
Unit:nos
21
97.

Motor Generator DC to AC set

As per the Specifiction

Qty:1
Unit:nos
21
98.

AC Squirrel Cage Motor with star delta starter and triple pole iron clad switch fuse with Mechanical Load

As per the Specifiction

Qty:1
Unit:no
21
99.

AC phase wound slip ring Motor with starter switch

As per the Specifiction

Qty:1
Unit:no
21
100.

Universal Motor with starter switch

As per the Specifiction

Qty:1
Unit:no
21
101.

Single phase Transformer core type air cooled

As per the Specifiction

Qty:3
Unit:no
21
102.

Three phase transform shell type oil cooled with Delta Star

As per the Specifiction

Qty:2
Unit:nos
21
103.

Electrical Machine Trainer ke arrangement dynamo meter instrument panel and power supply unit

As per the Specifiction

Qty:1
Unit:nos
21
104.

Diesel Generator Set with changeover switch over current breaker and water or air cooled with armature star-delta connections AC 3 phase

As per the Specifiction

Qty:1
Unit:no
21
105.

Pillar Electric Drill Machine Motorized

As per the Specifiction

Qty:1
Unit:no
21
106.

Motorized Bench Grinder

As per the Specifiction

Qty:1
Unit:no
21
107.

AC Series type Motor

As per the Specifiction

Qty:1
Unit:no
21
108.

Single Phase Capacitor Motor with starter switch

As per the Specifiction

Qty:1
Unit:no
21
109.

Try Square

As per the Specifiction

Qty:4
Unit:no
21
110.

Pliers flat nose

As per the Specifiction

Qty:4
Unit:nos
21
111.

Pliers round nose

As per the Specifiction

Qty:4
Unit:nos
21
112.

Plier long nose

As per the Specifiction

Qty:4
Unit:nos
21
113.

Multi meter Analog

As per the Specifiction

Qty:1
Unit:nos
21

General Information

Item Category
Electrician screwdriver thin stem insulated handle , Neon Tester , Bradawl , Brake Test arrangement with two spring balance rating , Bus bar with brackets , Contactor , auxiliary contacts , Crimping Tool , Copper bit soldering iron , De soldering Gun , Electrician Helmet , Gauge wire imperial stainless steel marked in SWG mm , Hydrometer , Insulated Screw driver , Knife Switch DPDT fitted with fuse terminals , Knife Switch TPDT fitted with fuse terminals , Laboratory Type Induction Coil , Limit Switch , Load Bank Lamp heater Type , Magneto spanner , MCCB , Pin Type insulators including hardware fitting , Shackle type insulators including hardware fitting , egg type insulators including hardware fitting , Spension type insulators including hardware fitting , Pincer , Pipe vice Cast Iron with hardened jaw open type , Plane cutters , Pliers flat nose insulated , Pliers long nose insulated , Pliers round nose insulated , Portable Electric Drill Machine , Relay Cut out Relays , Relay Reverse current , Relay Over current , Relay Under voltage , Rheostat Sliding type , Rotary Switch , Scissors blade SS , Wire Cutter and Stripper , Brass parallel rulers in a case , Hand held GPS , Ohm Meter Portable box type , Ohm Meter Series Type and Shunt Type , Digital Multi Meter , AC Voltmeter M I analog portable box type housed in Bakelite case , Milli Voltmeter centre zero analog portable box type housed in Bakelite case , Ammeter MC analog, portable box type housed in Bakelite case , Ammeter MC analog portable box type housed in Bakelite case , AC Ammeter MI analog portable box type housed in Bakelite case , Kilo Wattmeter Analog , Digital Wattmeter , A C Energy Meter , AC Energy Meter , Power Factor Meter Digital , Frequency Meter , Magnetic Flux Meter , Lux meter , Tachometer , Tong Tester Clamp Meter , Megger , Wheat Stone Bridge , Single Phase Variable Auto , Single Phase Variable AutoTransformer , Phase Sequence Indicator , Growler , AC Starters Resistance type starter , AC Starters Direct online Starter , AC StartersStar Delta Starter Manual , AC StartersStar Delta Starter Semi automatic , AC Starters Star Delta Starter Fully automatic , AC Starters Star Delta Starter Soft starter , AC StartersAuto Transformer type , AC Starters Soldering Iron , Temperature controlled Soldering Iron , Voltage Stabilizer , DC Power Supply , Battery Charger , Current Transformer , Potential Transformer , Motor Generator DC to AC set , AC Squirrel Cage Motor with star delta starter and triple pole iron clad switch fuse with Mechanical Load , AC phase wound slip ring Motor with starter switch , Universal Motor with starter switch , Single phase Transformer core type air cooled , Three phase transform shell type oil cooled with Delta Star , Electrical Machine Trainer ke arrangement dynamo meter instrument panel and power supply unit , Diesel Generator Set with changeover switch over current breaker and water or air cooled with armature star-delta connections AC 3 phase , Pillar Electric Drill Machine Motorized , Motorized Bench Grinder , AC Series type Motor , Single Phase Capacitor Motor with starter switch , Try Square , Pliers flat nose , Pliers round nose , Plier long nose , Multi meter Analog
Ministry Name
Ministry of Skill Development and Entrepreneurship
Department Name
Directorate General of Training
Organisation Name
N/a

Financial Information

Estimated Bid Value
₹9,00,000.00
Bid Offer Validity
120 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes

Tender Documents

4 Documents
GeM-Bidding-7940497.pdfMain Document
BOQ DocumentBOQ BOQ
BOQ DocumentBOQ BOQ
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Similar Tenders

View All

LED DRIVER 210-315 VDC 700mA 220W,LED DRIVER 64-143 VDC 700mA 100W,LED DRIVER 27-36 VDC 1.1A 33W,LE

₹27,800.00
GEM
Goods
Qty:688
5 Files
Airports Authority Of India
Boq › Boql
LED DRIVER 210-315 VDC 700mA 220W , LED DRIVER 64- 143 VDC 700mA 100W , LED DRIVER 27-36 VDC 1.1A 33W , LED DRIVER 38 VDC 450A 18W , LED DRIVER 24-42 VDC 840-1550A 50W , LED DRIVER 43-107 VDC 700mA 75W , LED DRIVER 12 VDC 2A 24W , LED DRIVER 12 VDC 3.3-4A 40W , LED DRIVER 24-45 VDC 300mA 17W , LED DRIVER 227-33 VDC 600mA 17W , Prewired 10 LED STRIPs of each 518mm x 9 mm , Prewired 8 LED STRIPs of each 230mm x 10 mm , Prewired 24 LED STRIPs of each 230mm x 10 mm , 150W Permanent Magnet DC VCB Spring charging Motor , 5A to 32 A 10kA B Curve SPN MCB , 5A to 32 A 10kA C Curve SP MCB , 5A to 32 A 10kA C Curve SPN MCB , 5A to 32 A 10kA C Curve TP MCB , 5A to 32 A 10kA C Curve FP MCB , 40 A 10kA C Curve FP MCB , 100 A 10kA C Curve FP MCB , 4 A 10kA C Curve SP MCB , 40 A, 415V FP 30mA RCCB , 63 A, 415V FP 30mA RCCB , 2MFD 440 VAC Capacitor , 2.5MFD 440 VAC Capacitor , 6MFD 440 VAC Capacitor , 5KVAR 440V Super heavy duty Cylindrical type Metalized poly propylene capacitor , 10KVAR 440V Super heavy duty Cylindrical type Metalized poly propylene capacitor , 15KVAR 440V Super heavy duty Cylindrical type Metalized poly propylene capacitor , 25KVAR 440V Super heavy duty Cylindrical type Metalized poly propylene capacitor , 4-pole 415V 50Hz 200A on load change over switch with utilization category of AC-23A , 415 V 6A 50Hz BS type base HRC fuse link with 80 kA breaking capacity , 500V, 63 A 50hz DIN type HRC fuse link for size 00 fuse base , 500V, 250 A 50hz DIN type HRC fuse link for size-1 fuse base. , PT fuse of 11kV 1 amp rating AVT type , 5KVAR 440V, 50Hz 3P Capacitor duty contactor with 1NO and 1NC , 10KVAR 440V 50Hz 3P Capacitor duty contactor , 15KVAR 440V 50Hz 3P Capacitor duty contactor , 25KVAR 440V 50Hz 3P Capacitor duty contactor , Control Contactor with Four way mounted add on contact blocks , 4 way 2NO 2NC add on blocks , 4 way 4NO add on blocks , 4 way 4NC add on blocks , 240VAC Power contactor coil , rotary cam selector switch , Flush mounted push button , Multifunction meter , LED pilot lamp Red , LED pilot lamp White , LED pilot lamp Blue , LED pilot lamp Amber , LED pilot lamp Green , LED pilot lamp Yellow , On delay analog timer , Analog daily timer , 4P Heavy duty connector 63A , 4P Heavy duty connector 25A , Insulated Cu cable 1C X 4sq.mm , Insulated Cu cable 1C X 6sq.mm , Insulated Cu cable 1C X 16sq.mm , DOL Starter for 7 to 10 HP Submersible pump , Star delta Starter upto 15HP Submersible pump , addressable Smoke detector with base , addressable Sounder with base , addressable heat detector with base , addressable manual call point , Short branch pipe with nozzle 63mm dia , Shutoff nozzle for fire hose reel , 4KVA Voltage stabilizer , 5KVA Voltage stabilizer , 55W Halogen dual filament bulb , SMC box 300x 200x105mm , SMF VRLA Battery 12V, 18Ah , SMF VRLA Battery 12V, 7Ah , Sealed AGM Battery 12V, 2.5Ah , Tall Tubular Battery 12V, 180Ah , Flooded Battery 12V, 150Ah , SMF VRLA Battery 2V, 240Ah for Solar powered lighting
June 4, 2025
June 25, 2025 at 1:00 PM
View Details

M and L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low S

GEM
Goods
Qty:112
4 Files
Indian Army
Boq › Boql
M and L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke FRLSH Unsheathed 1100 Volt grade multi stranded Cable , Supply and Fix Heavy Duty Wall Mounted Turbo Air Circulator Metal Blade Heavy duty fans AC 230Volts Single Phase 400 mm Sweep complete , S and F switch Socket Combination 5 pin 6 Amp white flush type 5 amps 230 volts.complete all as specified and directed. , Supply and install Window Air Conditioner units complete with chordless remote control unit , Supply and draw submain wiring with two single core 4 sq mm FR LSH PVC insulated copper cable 1100 volts grade multi stranded, unsheathed conductor in PVC Casing Capping , S and F drain pipe 5 by 8 inch dia PVC jacketed heavy duty with fixing of clamp , S and F AC socket with motor starter MCB DP 25 Amps capacity AC 230 Volt with Plug Top , M and L Cutting openings through brick wall for fixing of window type AIR Conditioner
May 26, 2025
June 16, 2025 at 8:00 PM
View Details

Basic Analogue Electronics Trainer,SMPS Trainer,Insulated Screw Driver,Knife double bladed electric

₹2,00,000.00
GEM
Goods
Qty:1,360
5 Files
N/a
Boq › Boql
Basic Analogue Electronics Trainer , SMPS Trainer , Insulated Screw Driver , Knife double bladed electrician , Insulated handle thin connector screw driver , Line tester , Heavy duty screw driver , Combination plier 210 mm , Long nose plier 170 mm , Tweezer , Phillips type screw driver set , Wire stripper , Soldering iron 25 w , Desoldering pump , Digital Multimeter-hand held , Temperature controlled soldering , SMD soldering , Wire gauge set , Permanent magnet bar , Solenoid with core , Electric bell , Battery storage lead acid , Hydrometer , Battery charger , Rheostat variable values , Variable resistance , DC AC ammeter , Analog Multimeter , LCR meter , Dual Trace Oscilloscope , Function Generator , Pulse Generator , Bread board , Regulated DC Power Supply , SMPS of PC , Transfomer , Rubber gloves , PCB solder flux etc , Resistors , Spare Transformers and power devices required for servicing SMPS , Connecting screwdriver 100 mm , Neon tester. , Screw driver set , Insulated combination pliers , Insulated side cutting pliers , Long nose pliers , Electrician knife , Soldering Iron , Crimping tool , Magneto spanner , Screw driver , Steel rule , Scriber straight , Allen key set , Tubular box spanner , Magnifying lenses , Continuity tester , Soldering iron 10w , Cold chisel , Scissors , Handsaw , Screwdriver Set of 5 bits , Crimping Tool for BNC and RJ-45 connectors , Punching Tool , Digital trainer kit , Logic Probes , Digital IC tester , Digital Ics , DC regulated power supply , Digital Multimeter , Bread Boards for circuit wiring and testing , Meggar , Ammeter , Voltmeter , Different types and makes of Motherboards , External HDD , CD ROM Drive , Ethernet card , Computer monitor of different types , Cabinet with SMPS , Keyboard and mouse , Internal PCI modems of at least four different makes and types , External modems of at least two different makes and types , Soldering iron 50 watt , De soldering pump , Computer Tool kit for students , Screw Driver Set , Combination Plier , Wire Stripper , IC Puller , Vacuum Cleaner , Hand blower , Hand Brush , Silicon grease , Heat sink agent , RAM , Router , Crimping tools for network cable , UTP cable , RJ 45 connectors , Power Meter Optical , Crimping tools for , Computer Toolkits , Motherboards , Cabinets , Processors , Hard Disk different types , TFT Monitors , Pen Drives , External Hard disk , External DVD Writer , Keyboards , Mouse , Anti-static pads , Digital Multimeters , Card Reader , Web Cam , Surround sound speakers , Different types of memory cards , UPS Trainer kit , Power electronics Trainer kit , SMPS Tester , Wireless Network Adapter , Managed Layer 2 Ethernet Switch , Managed Layer 3 Ethernet Switch , LAN Cards, wi-fi LAN Card , Media Convertor , UTP jack panel , SC Couplers , SC Pigtails , Crimping Tools , Switch with POE ports , POE adapters
May 31, 2025
June 16, 2025 at 6:00 PM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity, adhering to standards set by the industry, and demonstrating capability through past experiences. Bidders must possess the necessary licenses and certifications to supply the listed tools and equipment.

The technical specifications require that all tools proposed meet specific industry standards, ensuring safety and reliability in operation. Documentation proving compliance with quality benchmarks and performance standards must accompany each bid.

Bidders must submit their bids electronically through the designated procurement portal. It’s important to ensure all required documents are included and formatted correctly to avoid delays or disqualifications.

The payment terms typically involve a structured release of funds based on delivery milestones or upon achieving specific performance criteria related to the quality and compliance of the tools supplied.

MSEs and startups can gain considerable advantages through provisions that support their participation, including preferential selection criteria and guidelines encouraging local procurement as part of the government’s push towards self-reliance. This initiative aims to ensure a fair competitive landscape for all bidders, particularly smaller enterprises.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders