Supply of MS Angle Ply Boards Holding Stand

MS Angle Ply Boards holding stand size 6.5 ft x 6 ft x 4 ft capacity of holding 21 pieces

Goods
Qty:2

Tender Timeline

Tender Issue
June 14, 2025 at 12:44 PM

Tender Description

Tender Title: Supply of MS Angle Ply Boards Holding Stand
Reference Number: 545d7363
Issuing Authority/Department: Department of Military Affairs, Ministry of Defence

Scope of Work and Objectives

The objective of this tender is to procure MS Angle Ply Boards holding stand of size 6.5 ft x 6 ft x 4 ft capable of holding a total of 21 pieces. The contractor will be responsible for ensuring that the products meet the specified technical requirements and are delivered to the designated locations within the stipulated timeframe.

Eligibility Criteria

To participate in this tender, bidders must fulfill the following eligibility requirements:

  1. Be a registered entity with the ability to provide the specified goods.
  2. Meet all compliance and regulatory standards as outlined by the Ministry of Defence.
  3. Possess relevant experience in supplying similar products.

General Information

Item Category
MS Angle Ply Boards holding stand size 6.5 ft x 6 ft x 4 ft capacity of holding 21 pieces
Ministry Name
Ministry of Defence
Department Name
Department of Military Affairs
Organisation Name
Indian Army

Financial Information

Bid Offer Validity
60 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
2 Days

Tender Documents

4 Documents
GeM-Bidding-7967351.pdfMain Document
Other DocumentsOTHER
Buyer uploaded ATC documentATC ATC
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Experience Criteria
  • Bidder Turnover
  • Certificate (Requested in ATC)
  • Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

MS round pipe 2 inch dia,MS Angle 2 inch dia,MS flat 8 x 8 ft,HR sheet green 10 x 3 ft,Welding rod,

GEM
Goods
Qty:3,110
4 Files
Indian Army
UDHAMPUR, JAMMU & KASHMIR
Boq › Boql
MS round pipe 2 inch dia , MS Angle 2 inch dia , MS flat 8 x 8 ft , HR sheet green 10 x 3 ft , Welding rod , Nut bolt and screws
June 9, 2025
June 30, 2025 at 8:00 PM
View Details

Pre Fabricated Store shelter made up of steel structure of size 18.30m x 6.10m x 3.00m clear height

₹31,306.00
GEM
Goods
Qty:3,960
4 Files
Indian Army
Boq › Boql
Pre Fabricated Store shelter made up of steel structure of size 18.30m x 6.10m x 3.00m clear height up to ceiling level with partition walls , Fire extinguisher of capacity 6 Kgs along with its accessories confirming to IS 13849 Two Nos with each shelter , Lightning Conductor will be provided as under and stores are as per Appx F , Manufactured Sand M Sand conforming to IS 383 1970 Specifications for coarse and fine aggregates. , Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded , Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded , Bricks common burnt clay building bricks sub class B modular , Glass dividing strips 40x4mm , Prefabricated foundation Reinforcement type F 2 made of 12 mm and 10 mm , Form Work Type 2 Timber form work material for columns of size 0.3 X 0.3 X 0.9m , MS clamp made of MS flat 40 X 4 mm 200mm long bent in L shape with two holes , PVC Ceiling rose 2 obliq 3 Terminal. , LED Tube light fitting complete 4 feet long 18 watt Tube rod and Electronic Ballast , XLPE insulated PVC seathed Heavy Duty armoured multi core cable 16 sqmm 2 core aluminum conductor , Cable PVC insulated and PVC seathed 1.5 sqmm single core with copper conductor suitable upto 1100 V conforming to IS 694 1990 , Modular Switch one way 6 AMPs one module conforming to IS 3854 1966. , MS Screw 20 mm full threaded Per pkt 100 Nos conforming to IS 723 1972 , MS Screw 25 mm full threaded Per pkt 100 Nos conforming to IS 723 1972 , Tape Insulation 2 cm width 10.00mtr long ISI marked , MCB single pole 230V AC 50 Hz 6 Amps 10KA conforming to IS 8828 1996 IEC 60898 2002 suitable for lighting and other domestic loads. , MCB distribution boards in sheet metal enclosure 4 ways single door with blanks conforming to IS 8623, , Residual current circuit breaker with overload and short circuit protection double pole 32 Amps , Modular socket 6A 2 obliq 3 pin combined 2 module , White cover plate with frame 2 module , White cover plate with frame 4 module , Metal flush box 2 Module , Metal flush box 4 Module , PVC casing caping pipe 25mm x16mm conforming to IS 14927 Part ii , PVC casing caping L bend 25mm conforming to IS 371 1979 , PVC casing caping elbow 25mm dia conforming to IS 9537 Part III 1983 , PVC casing caping T 25mm for conduit pipe , PVC casing caping square box 4 inch x 4 inch , Drilling machine Bosch GBH 2 26 RE SDS Plus 2 Mode Rotary Hammer Drill 800 Watts 26mm electrically driven. Make Bosch. , Sieve for sieving fine and coarse agg 900 x 1500mm made of angle iron frame with stand. , Aluminum straight edge 50mm square 2mm thick 1800 mm long , Wooden Flat Gurmala , Water levelling pipe PVC 100 mtr , Hand rivet gun machine , Tasla Iron 18 , Shovel with wooden handle , Brick hammer 1.2Kgs , Cutting plier insulate 6 , Screw driver 12 inch with insulated plastic handle , Hacksaw frame with 2 blade , Drill bit 6mm dia , Drill bit 8mm dia , Drill bit 10mm dia , Hand gloves insulated with rubber , Tape measuring metallic 30m , Mason trowel Karchi , Axes picks with wooden handle , Fawda with wooden handle , Crowbar 5 feet long , Rammer with wooden handle of wt 5 10 Kg , Pipe wrench 12 inch , Pipe wrench 18 inch , Aluminum spirit level 6 inch , Brick Line , Spanner Adjustable 12 inch
June 9, 2025
June 30, 2025 at 1:00 PM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity with a valid business license, compliance with regulatory standards set by the Ministry of Defence, and showing relevant experience in providing similar products.

Bidders must provide several key certificates, including a company registration certificate, tax compliance certificate, and any applicable quality certification relevant to the products being offered.

The registration process requires bidders to fill out the necessary forms on the official tender portal, submit required documentation that demonstrates eligibility, and adhere to the guidelines provided in the tender documents.

Bidders must ensure that their products meet the specified technical specifications, including dimensions of 6.5 ft x 6 ft x 4 ft and a capacity to hold 21 pieces. Compliance with industry standards for materials used is also mandatory.

Micro, Small, and Medium Enterprises (MSEs) participating in this tender can enjoy special provisions. These benefits include prioritized evaluation and selection processes designed to enhance their chances of securing government contracts. Additionally, MSEs are encouraged through initiatives aligning with ‘Make in India’ policies, which promote local manufacturing and procurement.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders