Supply & Retrofitting Job of Protection Release IT-100 to MP4.1 for M/s C&S Electric Ltd Make ACB

Supply & retrofitting job of protection releaseµ IT-100 to MP4.1 for M/s C&S electric ltd make ACB

Goods
Qty:2

Tender Timeline

Tender Issue
June 17, 2025 at 2:12 PM

Tender Description

Tender Title: Supply & Retrofitting Job of Protection Release IT-100 to MP4.1 for M/s C&S Electric Ltd Make ACB

Reference Number: 8bddf3a6

Issuing Authority: Department of Atomic Energy

The Supply & Retrofitting Job of Protection Release IT-100 to MP4.1 for M/s C&S Electric Ltd Make ACB tender aims to engage qualified vendors for the supply, installation, and commissioning of specific electrical components. This tender is aimed at enhancing the operational efficiency and safety protocols of electrical systems used by the Department of Atomic Energy.

Scope of Work and Objectives

The primary scope of work includes not only the supply but also the installation and commissioning of the protection release devices (IT-100 to MP4.1) specifically designed for M/s C&S Electric Ltd make Air Circuit Breakers (ACB). The objectives are to ensure compliance with safety standards, improve reliability, and optimize the energy management systems within the department’s operational framework.

General Information

Item Category
Supply & retrofitting job of protection releaseμ IT-100 to MP4.1 for M/s C&S electric ltd make ACB , Installation and Commissioning ofμ IT-100 to MP4.1 for M/s C&S electric Ltd. make ACB
Ministry Name
PMO
Department Name
Department of Atomic Energy
Organisation Name
Directorate Of Purchase And Stores

Financial Information

Bid Offer Validity
90 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
3 Days

Tender Documents

5 Documents
GeM-Bidding-7961335.pdfMain Document
Other DocumentsOTHER
Other DocumentsOTHER
Buyer uploaded ATC documentATC ATC
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Certificate (Requested in ATC)
  • OEM Authorization Certificate *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

Supply of spares for trouble free operation and routine maintenance of M/s Volvo Penta make D. G. s

GEM
Goods
Qty:1
4 Files
Directorate Of Purchase And Stores
INDORE, MADHYA PRADESH
Univ
Supply of spares for trouble free operation and routine maintenance of M/s Volvo Penta make D. G. set
June 12, 2025
July 4, 2025 at 2:00 PM
View Details

C&S MAKE ACB CLOSING COIL, MODEL: CS-AVH-C-220,C&S MAKE SPRING CHARGING MOTOR, TYPE: UMG-27, VOLTS:

GEM
Goods
Qty:13
6 Files
Nlc India Limited
BIKANER, RAJASTHAN
Univ
C&S MAKE ACB CLOSING COIL, MODEL: CS-AVH-C-220 , C&S MAKE SPRING CHARGING MOTOR, TYPE: UMG-27, VOLTS: 220/160V, NLRPM: 640/430 , C&S MAKE AIR CIRCUIT BREAKER, MODEL: AH-30D-CS, IN= 3200A, UE= 415V, ICU= 65KA, ICS= 1005ICU
June 11, 2025
July 2, 2025 at 11:00 AM
View Details

Rate Contract for supply of spares for different models of M/s WILO Mather and Platt Pumps make pum

GEM
Goods
Qty:1
6 Files
Central Coalfields Limited
Univ
Rate Contract for supply of spares for different models of M/s WILO Mather and Platt Pumps make pump
June 17, 2025
June 27, 2025 at 6:00 PM
View Details

Supply of Taparia tester,Tools, Allen key sets ,mm,,Tools, Allen key sets ,inch,,MECO MAKE MULTIMET

₹20,000.00
GEM
Goods
Qty:5,741
6 Files
Hpcl Rajasthan Refinery Limited
BARMER, RAJASTHAN
Boq › Boql
Supply of Taparia tester , Tools, Allen key sets ,mm, , Tools, Allen key sets ,inch, , MECO MAKE MULTIMETER MODEL NO. , Supply of KLIN,IT Contact Cle , Rustlick 631 ,make , ITW Signo , ELECTRONIC COMPONENT CLEANER , WD,40 IN 400ML CAN , Supply of superlock nylon, 150 mm, , Supply of Superlock Nylon,100 mm, , 1by4inch PVC tube of 1 meter , Round insulated Lugs,0.5 sq mm, , Round insulated Lugs,0.75 sq mm, , Insulated 1.5 sq.mm lugs pin , Pin and Ring type insulated lug , Ring type insulated lugs Size , U type 1.5 SQ mm Copper tinne , Ferrule and cap 1by2 inch , SS, , Ferrule and cap 1by4 inch , SS, , Green PVC Sleeves , 0.5 Sq mm, , Green PVC Sleeves , 1.5 Sq mm, , Measuring tape 5 MTRS , Stanle , SS Cable ties , Loctite 406 , Loctite 495 , Loctite 243 , Neoprene rubber sheet Industrial , SS Fitting 1by4inch Tube fitting, Male Conn , SS Fitting 1by4inch Tube fitting, Female Conn , SS Tube Fitting, 1by4inch Male branch Tee , SS Tube Fitting, Union 1by4inch Tube OD , SS Fitting 1by4inch elbow, 1by4inch Tube ODx1by4 , SS fitting 1 by 4 inch tube OD x 1 by 2 inch Male NPT , SS fitting elbow 1by 4 inch tube OD x 1by 2 inch , SS Fitting 1by2inch Tube fitting, Male Conn , SS Fitting 1by2inch Tube fitting, Female Co , SS Tube Fitting,Male Branch Tee 1by2inch Tu , SS Tube Fitting,Union 1by2inch Tube OD , SS Fitting 1by2inch elbow, 1by2inch Tube ODx1by2 , SS Fitting 1by2inch Tube ODx1by4inch Male NPT , SS Fitting elbow, 1by2inch Tube ODx1by4inch Mal , Teflon tape , as per SLA , 2inch Aluminum tape , as per SLA , Insulation tape , as per SLA , Supply of Screw less non fuse , Supply of Screw less fuse TB , Cable Gland Adapter, 1by2inch NPT,M, x 3by4inch , Cable Gland Adapter, 3by4inch NPT,M, x 1by2inch , 1by2 inch NPT SS Cable Gland , S of 01SSby01S SIZE FLP cable g , S of 02by 02A SIZE FLP cable gl , S of 03 SIZE FLP cable gland , S of 04by 04A SIZE FLP cable gl , S of 05by 05A SIZE FLP cable gl , S of 06by 06A SIZE FLP cable gl , Supply of 1by2 inch U clamp , Supply of 1by2 inch U clamp, SS, , Supply of 3by4 inch U clamp, SS, , Silicon grease , Supply of plastic tags , SS 304 wire, as per SLA , Ceramic Fiber rope, as per SLA , Dowsil 732 Sealant, as per SLA , Tiki koteby Black Sali kote , as per SLA , 100 ohm resistor , as per SLA , 250 ohm resistor , as per SLA , 750 ohm resistor , as per SLA , 1000 ohm resistor , as per SLA , Rubber O rings for transmitters , RS232 to RS485 convertor, as per SLA , USB to RS232by422byRS485 convertor, as per SLA , C channel 100 mm x 50mm MS, as per SLA , L shape 50x50x5 mm MS angle, as per SLA
June 12, 2025
June 27, 2025 at 1:00 PM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity with a track record of executing similar projects. Bidder experience, technical expertise, and financial stability are essential factors in determining eligibility. Organizations need to ensure they fulfill these prerequisites to participate effectively in the tender process.

Bidders must ensure their proposals align with the outlined technical specifications for the IT-100 and MP4.1 protection release system. This includes adherence to safety standards and operational effectiveness, alongside the submission of detailed documentation of compliance with industry benchmarks and regulations.

The Earnest Money Deposit (EMD) serves as a guarantee of bid submission and must be remitted along with the proposal. The specific amount required will be outlined in the tender documentation, and it is essential for bidders to ensure compliance with this requirement to avoid disqualification from the bidding process.

Proposals must be submitted in the prescribed format through the methods specified in the tender documentation. The submission methods typically include electronic submission through designated platforms or physical delivery to specified locations, ensuring compliance with all stated guidelines.

MSEs are afforded specific benefits to encourage their participation in this tender. These may include relaxed eligibility criteria, favorable payment terms, and preferential consideration in the evaluation process, aimed at fostering local participation in line with the ‘Make in India’ initiative.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders