Procurement of Ring Sealing, Filters, Gaskets, and Aluminum Washers

Ring Sealing,Ring,Filter,Gasket,Ring Sealing,Gasket,Gasket 170A,Aluminum Washer 20 X 26,Aluminum Wa

Jalandhar, Punjab
Goods
Qty:732

Tender Timeline

Tender Issue
June 4, 2025 at 6:43 PM

Tender Description

Tender Title: Procurement of Ring Sealing, Filters, Gaskets, and Aluminum Washers
Tender Reference Number: 8d75f76a
Issuing Authority/Department: Department of Military Affairs, Ministry of Defence

Scope of Work and Objectives

This tender involves the procurement of various sealing and filter components, specifically targeting the categories of Ring Sealing, Filters, Gaskets, and Aluminum Washers. The aim is to ensure a continuous supply of high-quality components that meet stringent military specifications, thereby enhancing the operational readiness of equipment used by defence forces. The total quantity required stands at 732 units.

Tender BOQ Items

9 Items
1.

Ring Sealing

Qty:96
Unit:nos
30
2.

Ring

Qty:16
Unit:nos
30
3.

Filter

Qty:8
Unit:nos
30
4.

Gasket

Qty:3
Unit:nos
30
5.

Ring Sealing

Qty:47
Unit:nos
30
6.

Gasket

Qty:18
Unit:nos
30
7.

Gasket 170A

Qty:144
Unit:nos
30
8.

Aluminum Washer 20 X 26

Qty:200
Unit:nos
30
9.

Aluminum Washer 17 MM

Qty:200
Unit:nos
30

General Information

Item Category
Ring Sealing , Ring , Filter , Gasket , Gasket 170A , Aluminum Washer 20 X 26 , Aluminum Washer 17 MM
Ministry Name
Ministry of Defence
Department Name
Department of Military Affairs
Organisation Name
Indian Army
State
Punjab
City
Jalandhar

Financial Information

Bid Offer Validity
30 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
2 Days

Tender Documents

4 Documents
GeM-Bidding-7928862.pdfMain Document
BOQ DocumentBOQ BOQ
BOQ DocumentBOQ BOQ
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Similar Tenders

View All

PISTON WITH PIN STD,PISTON RING SET STD,BIG END BEARING CONNECTING ROD,MAIN BEARING CONNECTING ROD,

GEM
Goods
Qty:183
4 Files
Indo Tibetan Border Police (itbp)
Boq › Boql
PISTON WITH PIN STD , PISTON RING SET STD , BIG END BEARING CONNECTING ROD , MAIN BEARING CONNECTING ROD , VALVE INLET , VALVE EXHAUST , VALVE GUIDE INLET , VALVE GUIDE EXHAUST , VALVE SEAL INLET , VALVE SEAL EXHAUST , CRANK SHAFT OIL SEAL FRONT REAR , CYLINDER LINNER COMPLETE SET , CAM SHAFT OIL SEAL , OIL PUMP ASSY , OIL FILTER , FUEL FILTER , WATER PUMP ASSY , DISK CLUTCH WITH COVER ASSY , ACCELERATOR CABLE , CYLINDER HEAD GASKET , FLY WHEEL PILOT BEARING , ELEMENT AIR FILTER , DHOTI , ENGINE OVERHALING GASKET COMPLETE SET , SHOCK ABSORBER FRONT , SHOCK ABSORBER REAR , BRAKE MASTER CYLINDER , CRANK SHAFT THRUST WASHER , CAM SHAFT BUSH , THERMOSTATE VALVE , OIL SENDING UNIT , TEMPRATURE SENDING UNIT , BENJO WASHER ALL TYPE , ANABOND TUBE , BRAKE PAD , REAR BRAKE SHOE , UJ CROSS , WIPER BLADE , SIDE REAR VIEW MIRROR LH , SIDE REAR VIEW MIRROR RH , HEAD LIGHT ASSY , TAIL LIGHT ASSY , CLUTCH RELEASE BEARING , CHAIN TENSIONER ASSEMBLY , GASKET FOR CHAIN TENSIONER , SHOE FOR CHAIN TENSIONER CHAIN SHOE , SIDE RAIL UPPER CHAIN LOWER , SIDE RAIL FOR CHAIN UPPER SIDE RAIL , BUSHING OIL PUMP DRIVE , GASKET EXHAUST MANIFOLD , SIDE RAIL ASSEMBLY WITH BUSH , ASSEMBLY BEARING PIN SLIDING RAIL , RADIATOR CAP , CYLINDER KIT , CAME CHAIN KIT , KIT DISC CLUTCH FRICTION , CLUTCH PRESSURE PLATE KIT , CLUTCH HUB , CLUTCH HOUSING , CENTER COMPLETE CLUTCH , GASKIT KIT , VALVE KIT WITH OIL SEAL , O RING KIT , CHAIN SPROCKET SET , SHOE COMPLETE BRAKE SET FRONT , SHOE COMPLETE BRAKE SET REAR , HORN12V , CONNECTING ROD WITH BEARING , SPARK PLUG , SPEEDOMETER CABLE , BRAKE CABLE FRONT , CLUTCH CABLE , WINKER ASSY WITH BULB FRONT REAR LEFT RIGHT , ROLLER ASSY CAM CHAIN TENSIONER , TENSIONER ASSY CAM CHAIN , GUIDE CAM CHAIN , BRAKE CABLE FRONT CLUTCH CABLE , LIFTER ASSY TENSIONER , TATA OIL FILTER BS VI , TATA FUEL FILTER BS VI , TATA WIPER BLADE BS VI , SML OIL FILTER BS VI , SML FUEL FILTER , SML CLUTCH PLATE , SML PRESSURE PLATE , SML RELEASE BEARING , SML COMBINATION SWITCH BS VI , SML CLUTCH CYLINDER UPPER , SML SLEEVE CYLINDER LOWER , SML WIPER BLADE , TAIL LIGHT ASSY LED LEFT RIGHT TATA SUMO , WIPER BLADE TATA SUMO , SIDE MIRROR LEFT RIGHT TATA SUMO , WIPER BLADE MM SCORPIO , HEAD LIGHT RELAY 6 PIN , ANABOND 100GM , TIE ROD END COMPLETE SET TATA SUMO , DASH BOARD FLAG STAND , DOOR GUARD , SEAT BEAT , BACK SEAT ORGANISER BAG , DOOR GLASS FILM ROLLER
June 10, 2025
July 1, 2025 at 7:00 PM
View Details

Pre Fabricated Store shelter made up of steel structure of size 18.30m x 6.10m x 3.00m clear height

₹31,306.00
GEM
Goods
Qty:3,960
4 Files
Indian Army
Boq › Boql
Pre Fabricated Store shelter made up of steel structure of size 18.30m x 6.10m x 3.00m clear height up to ceiling level with partition walls , Fire extinguisher of capacity 6 Kgs along with its accessories confirming to IS 13849 Two Nos with each shelter , Lightning Conductor will be provided as under and stores are as per Appx F , Manufactured Sand M Sand conforming to IS 383 1970 Specifications for coarse and fine aggregates. , Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded , Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded , Bricks common burnt clay building bricks sub class B modular , Glass dividing strips 40x4mm , Prefabricated foundation Reinforcement type F 2 made of 12 mm and 10 mm , Form Work Type 2 Timber form work material for columns of size 0.3 X 0.3 X 0.9m , MS clamp made of MS flat 40 X 4 mm 200mm long bent in L shape with two holes , PVC Ceiling rose 2 obliq 3 Terminal. , LED Tube light fitting complete 4 feet long 18 watt Tube rod and Electronic Ballast , XLPE insulated PVC seathed Heavy Duty armoured multi core cable 16 sqmm 2 core aluminum conductor , Cable PVC insulated and PVC seathed 1.5 sqmm single core with copper conductor suitable upto 1100 V conforming to IS 694 1990 , Modular Switch one way 6 AMPs one module conforming to IS 3854 1966. , MS Screw 20 mm full threaded Per pkt 100 Nos conforming to IS 723 1972 , MS Screw 25 mm full threaded Per pkt 100 Nos conforming to IS 723 1972 , Tape Insulation 2 cm width 10.00mtr long ISI marked , MCB single pole 230V AC 50 Hz 6 Amps 10KA conforming to IS 8828 1996 IEC 60898 2002 suitable for lighting and other domestic loads. , MCB distribution boards in sheet metal enclosure 4 ways single door with blanks conforming to IS 8623, , Residual current circuit breaker with overload and short circuit protection double pole 32 Amps , Modular socket 6A 2 obliq 3 pin combined 2 module , White cover plate with frame 2 module , White cover plate with frame 4 module , Metal flush box 2 Module , Metal flush box 4 Module , PVC casing caping pipe 25mm x16mm conforming to IS 14927 Part ii , PVC casing caping L bend 25mm conforming to IS 371 1979 , PVC casing caping elbow 25mm dia conforming to IS 9537 Part III 1983 , PVC casing caping T 25mm for conduit pipe , PVC casing caping square box 4 inch x 4 inch , Drilling machine Bosch GBH 2 26 RE SDS Plus 2 Mode Rotary Hammer Drill 800 Watts 26mm electrically driven. Make Bosch. , Sieve for sieving fine and coarse agg 900 x 1500mm made of angle iron frame with stand. , Aluminum straight edge 50mm square 2mm thick 1800 mm long , Wooden Flat Gurmala , Water levelling pipe PVC 100 mtr , Hand rivet gun machine , Tasla Iron 18 , Shovel with wooden handle , Brick hammer 1.2Kgs , Cutting plier insulate 6 , Screw driver 12 inch with insulated plastic handle , Hacksaw frame with 2 blade , Drill bit 6mm dia , Drill bit 8mm dia , Drill bit 10mm dia , Hand gloves insulated with rubber , Tape measuring metallic 30m , Mason trowel Karchi , Axes picks with wooden handle , Fawda with wooden handle , Crowbar 5 feet long , Rammer with wooden handle of wt 5 10 Kg , Pipe wrench 12 inch , Pipe wrench 18 inch , Aluminum spirit level 6 inch , Brick Line , Spanner Adjustable 12 inch
June 9, 2025
June 30, 2025 at 1:00 PM
View Details

SEALING RING TO DRG NO. 20-17-22(AS PER DRAWINGS AND SPECIFICATIONS)

GEM
Goods
Qty:1,883
4 Files
Armoured Vehicles Nigam Limited
Univ
SEALING RING TO DRG NO. 20-17-22(AS PER DRAWINGS AND SPECIFICATIONS)
June 7, 2025
June 28, 2025 at 1:00 PM
View Details

Battery 12V 100 AH,Engine oil 15W 40,Cylinder liner,Piston Assy,Ring set,C.R Brg,O Ring kit,Valve a

₹27,996.00
GEM
Goods
Qty:4,189
4 Files
Indian Army
ALLAHABAD, UTTAR PRADESH
Boq › Boql
Battery 12V 100 AH , Engine oil 15W 40 , Cylinder liner , Piston Assy , Ring set , C.R Brg , O Ring kit , Valve and Guide , Alternator , Packing kit and Gasket , Pumpover hall and Nozzle , Silencer blow , Valve Seal , Battery 12V 80 AH , Fuel feed pump , Fuel Pipe 17 X 17 size , Oil Filter , Fuel Filter , Air filter , Oil filter , Fuel filter paper , Fuel filter cloth , Fuel Pipe line 19X19 size , Fan Belt , Bty 130 AH , Banjo Bolt 19mm , Banjo Bolt 19mm copper washer , AVR , Self starter , Fuel filter 1 ltr , Water seprator , Bty 100 AH , Bty lead positive and negative , Over flow pipe Injector , Engine Mounting pad , Fuel tank cap and Fuel tank hose pipe and Clamp , Door Hinges , Door Lock , Diesel fuel tank packing Kit , Amp Meter , Volt Meter , Hrs Meter , MCB 100 Amp 3 Pole , Digital Meter , All System Indicator , Multi Function Indicator , Fuel filter 0.5 ltr , Ignition switch , Fuel Pipe line 19x19 size , FIP , Fuel filter , Exhaust mtg bkt , Solenoid stopper , Fuel Pipe line 17X19 size , Mounting Pad , Fuel Injector PVC Rubber tube 25mm , Tool kit , Head gasket , Silencer cover , Silencer outlet pipe , Fuel indicator glass , Over flow pipe , Fan belt , Fuel pressure pipe , Fuel pipe line , Air Filter , EVR , Genr fuze , EVR fuze , Primary diesel filter , Secondary diesel filter , Dynamo Belt , Change over switch , Battery acid , Fuel pump , Feed pump out union with NRD Value , Benzo washer , Feed pump with hand primer , Fuel Pipe 17X17 size , Banjo Bolt 17mm , Banjo Union , Banjo Bolt 17mm copper washer , Sparking plug , Fuel Pipe , Bty 12V 9 AH , Distilled water , Carburetor , Fuel pipe , Oil sending unit , Spark plug , Piston ring set , Starting Assy , Electric tube , Carbureting sensor wire , Piston connecting rod , Gasket set , Anabond kit , Ignition coil , Fuel pipe rubber 10 inch long , Fuel pipe rubber Bend one side 6 inch long , Fuel Indicating cover , Door lock , Petrol jali , Exhaust fan 300mm , Exhaust fan 250mm , Exhaust fan 200mm , Bty charging alternator , Brass Bty terminal positive , Brass Bty terminal negative , Aluminium lugs 25 Sqmm , Aluminium lugs 16 Sqmm , Aluminium lugs 10 Sqmm
June 6, 2025
June 28, 2025 at 9:00 AM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity with valid licenses, prior experience in supplying similar military-grade items, and compliance with specific quality standards. Interested bidders must ensure they meet all listed criteria in order to successfully participate in the tender process.

To comply with the tender, bidders need to provide various required certificates, such as proof of registration with relevant authorities, quality certification (e.g., ISO certifications), and any compliance documents that demonstrate adherence to military standards.

The registration process for this tender involves creating an account on the official e-procurement platform. Once registered, bidders can access tender documents, submit bids, and track submissions. Ensure necessary documents are scanned and ready for upload during registration.

Bidders must submit their documents in accepted document formats, namely PDF and Word files. This ensures that all submissions are clear, professional, and easy to read for evaluators.

The payment terms are typically specified post-delivery acceptance, ensuring compliance with contract conditions. A performance security fee, often a percentage of the contract value, is required from successful bidders to assure fulfillment of contract obligations.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders