Overview - Ministry of Housing and Urban Affairs

Supply of Dummy plug suitable for installation in cable housing of Siemens make 66kV, 2000A, 8DN8 G

East delhi, Delhi
Goods
Qty:2

Tender Timeline

Tender Issue
May 28, 2025 at 4:50 PM

Tender Description for 2de25e417

Overview

The tender titled Supply of Dummy plug suitable for installation in cable housing of Siemens make 66kV, 2000A, 8DN8 G with reference number 2de25e417 is issued by the Ministry of Housing & Urban Affairs (MoHUA). This procurement focuses on acquiring high-quality dummy plugs designed for use in Siemens cable housing systems, ensuring operational reliability and safety in electrical applications.

Scope of Work and Objectives

The primary objective of this tender is to supply dummy plugs that meet Siemens specifications, specifically designed for a 66kV capacity and 2000A current rating. These plugs will be integral in maintaining the integrity of the cable housing and are vital components for various electrical infrastructure projects managed by MoHUA. The tender encompasses the entire supply chain, from manufacturing through to delivery at specified locations as outlined in the tender documents.

General Information

Item Category
Supply of Dummy plug suitable for installation in cable housing of Siemens make 66kV, 2000A, 8DN8 GI
Ministry Name
Ministry of Housing & Urban Affairs (MoHUA)
Department Name
Ministry of Housing and Urban Affairs
Organisation Name
Delhi Metro Rail Corporation Limited
State
Delhi
City
East delhi

Financial Information

Bid Offer Validity
180 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
2 Days

Tender Documents

3 Documents
GeM-Bidding-7899620.pdfMain Document
Other DocumentsOTHER
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Certificate (Requested in ATC)
  • OEM Authorization Certificate
  • Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

Supply of Airfield lighting cable,Supply of 6 Sqmm Size 5KV grade plug and receptacles,Supply of se

₹83,437.00
GEM
Goods
Qty:3,055
5 Files
Airports Authority Of India
VADODARA, GUJARAT
Boq › Boql
Supply of Airfield lighting cable , Supply of 6 Sqmm Size 5KV grade plug and receptacles , Supply of series type Isolating Transformers , Supply of Converter for LED type Operational area signage of all sizes , Supply of 15W LED driver Circuit with LED , Supply of LED strip , Supply of Moon type Green Filter , Supply of Reflector suitable for AMA make PAPI lights , Supply of Reflector suitable for AMA make Elevated type Threshold light , Supply of Moon type Red Filter elevated type Uni-Directional , Supply of Moon type clear Filter , Supply of 360 dgree outer dome glass , Supply of Reflector , Supply of Base Plate , Supply of Blue LED , Supply of LED driver circuit , Supply of HIRL Lamp Holder , Supply of PAPI Lamp Holder , Supply of 120V, 1000W Halogen lamp , Supply of neoprene rubber gasket
June 4, 2025
June 25, 2025 at 4:00 PM
View Details

Supply of 200W 6.6A Bi Pin Halogen Lamp for existing PAPI and simple approach as per ICAO CAR and A

GEM
Goods
Qty:2,126
6 Files
Airports Authority Of India
Boq › Boql
Supply of 200W 6.6A Bi Pin Halogen Lamp for existing PAPI and simple approach as per ICAO CAR and AAI specification complete as required. Make OSRAM or other equivalent approved make. , Supply of 105W 6.6A reflector Halogen Lamp with inbuilt holder suitable for Inset fittings as per ICAO CAR and AAI specification complete as required. Make OSRAM or other equivalent approved make , Supply of 100W 6.6A Bi Pin Halogen Lamp with holder for existing Runway End lights as per ICAO CAR and AAI specification complete as required Make OSRAM or other equivalent approved make , Supply of 1Cx16 sqmm size 5 KV grade Airfield Lighting Cable copper conductor PVC insulated PVC sheathed unshielded anti termite and rodent treated UG airfield lighting cable as per Specifications. , Supply of 250A HRC fuse suitable for 50KW NASU Make CCR , Supply of 160 100A HRC Fuse SCR fuse , Supply of 63A HRC Fuse Suitable for 4KW CCR , Trip Indicator Fuse for SCR fuse , Prismatic Clear lens for SAPL Light , 200w 6.6 6.6A Isolation Transformer for PAPI and SAPL systems. , 45w 6.6 6.6A Isolatin Transformer for Taxiway lights. , Supply of rubber Neoprene Gasket suitable for round base plate of Runway Taxiway edge light fitting Housing Boxes, as per AAI specification etc complete as required , Supply of self bonding electrical insulation HT Tape roll 10mtrs plus or minus 10 percentage each roll of width 19 to 25 mm, 3M Make scoth 23, AAI specification complete as required. , Supply of Omega Multipurpose Compound Rubber, Single Side Usage Specification gauge 0.8mm and net weight 1Kg each , Supply of LED Drivers suitable for existing LED flood lights, Make Philips, Model Xitantum 150W 0.7A , Supply of Polycarbonate made bird spikes for bird control attached to Airfield Light fixtures, support structures,Poles Poles and Strutures Height not more than 5 meters etc., as required , Supply of 32 Amps Cylindrical HRC Fuse 415V AC 80kA Type HG, Size F1 IS 13703 Part II Make L and T , 5 KV grade plug and receptacle of type I class B connector16 sq mm , Supply of 360 degrees outer clear domes suitable for AMA make Runway edge light fittings , Supply of 360 degrees Prismatic Inner clear lenses suitable for AMA make Runway edge lights , Supply of 180 degrees Yellow, Right filters for suitable for AMA make Runway edge lights , Supply of180 degrees Yellow , Left filters suitable for AMA make Runway edge lights , Prismatic green filters for threshold lights , Prismatic Red filters for End lights , 32A HRC cylindrical fuse , Supply ofLED Lamp with drive suitable for existing Inset type Omnidirectional medium intensity LED taxiway Apron Edge light fitting for operation at 6.6 Amps as per Specifications MakeATGAirportsltd
May 28, 2025
June 18, 2025 at 1:00 PM
View Details

Supply of extension panels(both LHS & RHS) suitable for L&T make MCC Drawing no. REJ/21-23/13,400A

₹33,000.00
GEM
Goods
Qty:5
8 Files
Chennai Petroleum Corporation Limited
TIRUVALLUR, TAMIL NADU
Univ
Supply of extension panels(both LHS & RHS) suitable for L&T make MCC Drawing no. REJ/21-23/13 , 400A SFU module must consists of 3PN SFU Type: FN400 TPN, DIN HRC fuse link with 400/5A, 15VA, CL-1 , supervision charges for Removing the verticals 1F, 7F and 8F in the existing ETP-4A MCC including Bus , SUPERVISION CHARGES FOR INSTALLATION
May 27, 2025
June 18, 2025 at 9:00 AM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity with the capacity to supply electrical components. Bidders must demonstrate experience in providing equipment similar in specifications to the dummy plugs aimed at Siemens make systems. Organizations must also comply with all relevant legal and regulatory standards.

The technical specifications for the dummy plugs require them to be compatible with Siemens cable housing setups rated for 66kV and 2000A. Additionally, the materials used should exhibit high durability and adhere to industry-recognized quality standards, ensuring reliability during operation.

Bidders are expected to submit all required documents through the designated online platform. This includes submitting formats that are compliant with the specified guidelines in the tender. Attention to ensuring the completeness of all documentation is essential for acceptance in the evaluation process.

MSEs can avail of specific provisions designed to level the playing field in competitive bidding. This includes simplified documentation requirements and considerations during the evaluation process, aimed at increasing their chances of securing contracts.

Payments will generally be structured based on successful delivery and acceptance of the dummy plugs, as outlined in the tender agreement. Additionally, bidders may be required to provide a performance security to assure supplier compliance and commitment to quality as per the tender’s financial guidelines.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders