Set of High Feed Cutter DIA 63MM for 50 HRC Material

SET OF HIGH FEED CUTTER DIA 63MM MM FOR 50 HRC MATERIAL AS PER TUNGALOY CODE OR SIMILAR AS PER

Goods
Qty:1
EMD: ₹42,700

Tender Timeline

Tender Issue
June 11, 2025 at 10:33 AM

Tender Description

Tender Title: Set of High Feed Cutter DIA 63MM for 50 HRC Material

Tender Reference Number: 11615bf02

Issuing Authority/Department: Department of Defence Production, Ministry of Defence

The Set of High Feed Cutter DIA 63MM for 50 HRC Material is a crucial component intended for utilization within defense production frameworks. This tender seeks to procure a set of high-grade high feed cutter tools conforming to Tungaloy code or similar specifications that meet stringent industrial standards.

Scope of Work and Objectives

The primary objective of this tender is to acquire a high-efficiency cutting tool that provides enhanced productivity and durability for material processing. The selected contractor will supply tools that:

General Information

Item Category
SET OF HIGH FEED CUTTER DIA 63MM MM FOR 50 HRC MATERIAL AS PER TUNGALOY CODE OR SIMILAR AS PER
Ministry Name
Ministry of Defence
Department Name
Department of Defence Production
Organisation Name
Advanced Weapons And Equipment India Limited

Financial Information

EMD Amount
₹42,700.00
Minimum Turnover
₹4.00 Lakh (s)
Bid Offer Validity
180 (Days)
Arbitration Clause
No
Mediation Clause
No

Evaluation and Technical Information

Evaluation Method
Total value wise evaluation
Inspection Required
Yes
Technical Clarifications Time
3 Days

Tender Documents

5 Documents
GeM-Bidding-7951698.pdfMain Document
Other DocumentsOTHER
Other DocumentsOTHER
Other DocumentsOTHER
GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Documents Required from Seller

  • Experience Criteria
  • Bidder Turnover
  • OEM Authorization Certificate *In case any bidder is seeking exemption from Experience / Turnover Criteria
  • the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

View All

Construction material for Force Preservation Bkr Supply and Construction size 6 ft dia x 8 ft lengt

₹2,25,000.00
GEM
Goods
Qty:1.7Cr
5 Files
Indian Army
KAMRUP, ASSAM
Boq › Boql
Construction material for Force Preservation Bkr Supply and Construction size 6 ft dia x 8 ft length x 1800mm or 6 inch thickness , Supply and fixing of Hume pipe 6 ft dia x 8 ft length x 1800mm or 6 inch thickness Rly Gde NP4 ISI Marked , Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JK or Dalmiya or ISI Equivalent , Coarse sand free from vegetation , Coarse agg 20mm , PBS Roll 20m long width of 0.9Mtr ISI Marked with Min weight of 34 Kgs per Roll , PVC Pipe 110 mm dia each 3 mtr length Make Prince or Finolex or Supreme or ISI Equivalent , HDPE Water Proof cover 15 ft x15 ft Make Shalimar , Sunking Pico plus light 50 Lumens LED 1 white LED with cover 50 lumens per weight with over 50 Lumens per watt , Plywood 4ft x 8ft x 12mm Termite Resistant and BWR Confirming to IS 1328-1996 Make Supreme or Assam or Green Ply or Kit Ply or ISI Mark , AAC Blocks of size 600x200x150mm Make Brikolite or NCL or Nucon or ISI Equivalent , GI binding wire TATA or SAIL or JSW or ISI Equivalent , Wooden Scantling of size 50mm x 40 mm , Nails various sizes , Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 Make Birla Gold or Ambuja Ultratech or ACC or JK or Dalmiya or ISI Equivalent , Coarse Sand free from vegetation , Coarse aggregate 40 mm graded , Stone Boulder 9inch to 12inch , PVC Pipe 75 mm dia and 3 mtr length
June 6, 2025
June 27, 2025 at 6:00 PM
View Details

HIGH FEED MILLING CUTTER 80 MM OR EQUIVALENT WITH SUITABLE INSERT GRADE P40 AND SPARES HVF6900 0185

₹31,084.00
GEM
Goods
Qty:30
8 Files
Armoured Vehicles Nigam Limited
TIRUVALLUR, TAMIL NADU
Univ
HIGH FEED MILLING CUTTER 80 MM OR EQUIVALENT WITH SUITABLE INSERT GRADE P40 AND SPARES HVF6900 01851 , CARTRIDGE HEAD LONG EDGE MILLING CUTTER AS PER SPECIFICATION NO HVF 8900 01300
June 6, 2025
June 27, 2025 at 3:00 PM
View Details

INSERT TYPE RAMPING END MILL DIA 16MM E tegutec code TE90AX 2160 09 L,SQUARE SHOULDER MILL DIA 63MM

₹18,372.00
GEM
Goods
Qty:137
5 Files
Armoured Vehicles Nigam Limited
TIRUVALLUR, TAMIL NADU
Boq › Boql
INSERT TYPE RAMPING END MILL DIA 16MM E tegutec code TE90AX 2160 09 L , SQUARE SHOULDER MILL DIA 63MM , CUTTER SQUARE SHOULDER MILLING DIA 50MM TO WIDIA ord no 239 69 540 WIDAX M690 STYLE , CUTTER SQUARE SHOULDER MILLING DIA 80 MM TO WIDIA ord no 239 69 548 WIDAX M690 STYLE , CUTTER FOR MILLING M690 STYLE DIA 100MM , INSERT TYPE SHELL MILL PLUNGE CUTTER DIA 40MM , FACEMILL ARBOR ISO 50 DIN NO.69871 , CHAMFER CUTTER DEEP 30 DEG MINOR DIA 30 MAJOR DIA 50MM SHELL MILL TYPE
June 5, 2025
June 26, 2025 at 3:00 PM
View Details

Construction material for Bty Comd Post 8.06m x 6.02m x 3.40m as per technical specification and dr

₹36,000.00
GEM
Goods
Qty:651
5 Files
Indian Army
KAMRUP, ASSAM
Boq › Boql
Construction material for Bty Comd Post 8.06m x 6.02m x 3.40m as per technical specification and drawings attached , Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JK or Dalmiya , Coarse sand free from vegetation , Coarse aggregate 20mm graded , Coarse aggregate 40 mm graded , Coarse aggregate 40-63 mm graded , Stone Boulder 9 inch to 12 inch , Water Proofing compoundconfirming to IS 2645-2003 Make Pidilite or Dr.fixit or Fevicol , HDPE sand bag OG colour of size 15 inch x 30 inch , Painting Brush 4 inch ISI Marked , Anti corrosive red oxide zinc chromate primer confirming to IS 5-2004 Make Berger or Asian or Nerolac , Synthetic Paint enamelled OG confirming to IS 5-2004 Make Berger or Asian or Nerolac , Thinner Make Nerolac or Berger or Asian , SRT 2440 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW Camouflage Pattern , ISMB hot rolled MS 200 x 100 3M MakeTATA or SAIL or JSW , ISMB hot rolled MS 200 x 100 4M Make TATA or SAIL or JSW , Polythene sheet colour less and weight of sheet shall be not less than 70gm per Sqm , PBS Roll 20m Long Width of 0.9Mtr ISI Marked with Min weight of 34 Kgs per Roll , Prefeb mild steel door of size 900x 1700mm outer frame made out of ISA 40x 40x6mm , Shuttering and Nails Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Wooden scantling various size , Nails various size , Lightning Conductor Air terminal single pointed aluminium rod 12mm dia and 300mm long. , Testing point terminal block make of Gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw. , Aluminium strips 25x3mm. , Galvanised iron strip 32x6mm. , Funnel fitted with 20mm dia GI Pipe 1.5m long Make Jindal or Tata or Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side. , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame. , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make - Presto or Polycab or Finolex , Charcoal , Slt , Double Sleeping Bunk complete with plywood matress and all connected accessories all as per Technical Specification. , Study chair of size length 56cm height 82 cm width 56 cm Lacqured finish with arm seat and back cushion velvet holestry Make supreme or equivalent , Study table of size 4x2 wooden top on round tube structture with three drawers unit , Steel Bed side locker of size 1000mm x 1520mm x 450 mmcomplete with all accessories as per tech spec. , Water Dispenser of 230 V 500 Watts without refrigerator with normal cold and heating capacity of 5 Lts per hour , Plastic dustbin of capacity 40 ltrs Make NEELKAMAL or CELLO or SUPREME. , Solar System comprising of 1 x 500 Watt Monocrystaline PV Panel 100Ah Solar Bty Min 550VA AC or DC Inverter with inbuilt MPPT and Charge controller equivalent , Portable indoor type High quality Kero Heater metal body ignites type of continues heating duration min 8 hrs
May 27, 2025
June 18, 2025 at 7:00 PM
View Details

Frequently Asked Questions

The eligibility requirements include being a registered entity that can supply the requested high feed cutter tools, demonstrable experience in delivering similar products, and compliance with specified industry standards. Companies must provide relevant documentation proving their capabilities and adherence to quality benchmarks associated with high feed cutters.

Participants are required to align with specified technical specifications, including adherence to Tungaloy code or equivalent standards. Proposals should provide comprehensive details about product materials, design, and evidence of successful application in relevant industries, emphasizing performance metrics for high HRC materials.

The submission process necessitates that vendors prepare a complete proposal along with all necessary supporting documents. Submitted documents are expected to be in specified formats as indicated in the tender details, and all submissions must be made by the deadline outlined in the tender documentation for consideration in the evaluation phase.

Yes, as part of the financial requirements, proposals should include evidence of financial stability, competitive pricing, and pricing strategies pertinent to the supply of high feed cutter tools. This transparency is crucial for the evaluation of overall bids and the financial capacity to fulfill contractual obligations.

Micro, Small, and Medium Enterprises (MSEs) may benefit from specific provisions aimed at enhancing participation rates in government tenders. Opportunities include reduced financial entry barriers, potential grants, and support systems emphasizing local production under the Make in India initiative, thereby fostering inclusivity and encouraging local procurement rules.

Probable Bidders

Companies likely to bid

Get Tender Alerts

Get notifications for similar tenders